13090047CITY OF CUPERTINO BUILDING PERMIT
BUILDING ADDRESS: 19638 STEVENS CREEK BLVD STE 270
CONTRACTOR: ILLUMINART SIGNS
PERMIT NO: 13090047
OWNER'S NAME: EVERSHINE VI LP
1012 MORSE AVE
DATE ISSUED: 09/09/2013
OWNER'S PHONE: 4083431088
SUNNYVALE, CA 94089
PHONE NO: (408)289-1883
®. LICENSED CONTRACTOR'S DECLARATION
JOB DESCRIPTION: RESIDENTIAL 0 COMMERCIAL
License ClassC4�,- Lic. # R i7 `i"'
PACIFIC PRECIOUS METALS- INSTALL 1 ILLUMINATED
/
WALL SIGN
Contractor�� 1�wlr 614,&-'4' k i Datey 111
STS# _ 2RO
I hereby affirm that I am licensed under the provisions of Chapter 9
(commencing with Section 7000) of Division 3 of the Business & Professions
Code and that my license is in full force and effect.
I hereby affirm under penalty of perjury one of the following two declarations:
I have and will maintain a certificate of consent to self -insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
Sq. Ft Floor Area:
Valuation: $500
performance of the work for which this permit is issued.
I have and will maintain Worker's Compensation Insurance, as provided for by
Section 3700 of the Labor Code, for the performance of the work for which this
APN Number: 3(_q 060 (20(03
Occupancy Type:
permit is issued.
APPLICANT CERTIFICATION
I certify that I have read this application and state.that the above information is
PERMIT EXPIRES IF WORK IS NOT STARTED
correct. I agree to comply with all city and county ordinances and state laws relating
WITHIN 180 DAYS OF PERMIT ISSUANCE OR
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
180 DAYS FRO. ED INSPECTION.
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
costs, and expenses which may accrue against said City in consequence of the
Issue Date:
granting of this permit. Additionally, the applicant understands and will comply
with all non -point source regulations per the Cupertino Municipal Code, Section
9.18.
(�
RE -ROOFS:
Signature / ,/�QlfGV1/ { / Date r1fh
All roofs shall be inspected prior to any roofing material being installed. If a roof is
installed without first obtaining an inspection, I agree to remove all new materials for
inspection.
❑ OWNER -BUILDER DECLARATION
Signature of Applicant: Date:
I hereby affirm that I am exempt from the Contractor's License Law for one of
the following two reasons:
ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER
I, as owner of the property, or my employees with wages as their sole compensation,
will do the work, and the structure is not intended or offered for sale (Sec.7044,
Business & Professions Code)
1, as owner of the property, am exclusively contracting with licensed contractors to
HAZARDOUS MATERIALS DISCLOSURE
construct the project (Sec.7044, Business & Professions Code).
I have read the hazardous materials requirements under Chapter 6.95 of the
California Health & Safety Code, Sections 25505, 25533, and 25534. 1 will
I hereby affirm under penalty of perjury one of the following three
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
declarations:
Health & Safety Code, Section 25532(a) should I store or handle hazardous
I have and will maintain a Certificate of Consent to self -insure for Worker's
material. Additionally, should I use equipment or devices which emit hazardous
Compensation, as provided for by Section 3700 of the Labor Code, for the
air contaminants as defined by the Bay Area Air Quality Management District I
performance of the work for which this permit is issued.
will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and
I have and will maintain Worker's Compensation Insurance, as provided for by
the Health & Safety Code, Sections 25505, 25533, and 25534.
Section 3700 of the Labor Code, for the performance of the work for which this
Owner Date:
permit is issued.
or authorized agent: _T-/,
I certify that in the performance of the work for which this permit is issued, I shall
not employ any person in any manner so as to become subject to the Worker's
Compensation laws of California. If, after making this certificate of exemption, I
CONSTRUCTION LENDING AGENCY
become subject to the Worker's Compensation provisions of the Labor Code, I must
I hereby affirm that there is a construction lending agency for the performance of
forthwith comply with such provisions or this permit shall be deemed revoked.
work's for which this permit is issued (Sec. 3097, Civ C.)
Lender's Name
APPLICANT CERTIFICATION
Lender's Address
I certify that I have read this application and state that the above information is
correct. I agree to comply with all city and county ordinances and state laws relating
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
ARCHITECT'S DECLARATION
costs, and expenses which may accrue against said City in consequence of the
I understand my plans shall be used as public records.
granting of this permit. Additionally, the applicant understands and will comply
with all non -point source regulations per the Cupertino Municipal Code, Section
Licensed Professional
9.18.
Signature Date
CUPERTINO
SIGN PERMIT APPLICATION
COMMUNITY DEVELOPMENT DEPARTMENT - BUILDING DIVISION
10300 TORRE AVENUE - CUPERTINO, CA 95014-3255
(408)777-3228 - FAX (408) 777-3333 - building(a)cuoertino.ora
PROJECT ADDRESS
19638 Stevens Creek Blvd. #270
APN # 60 (D 012
OWNER NAME
Evershine Vl L.P.
PHONE
408-343-1088
E-MAIL
STREET ADDRESS
19620 Stevens Creek Blvd. #200
CITY, STATE, ZIP Cupertino, Ca 95014
FAX
(408)495- sales@calneon.com
CONTACT NAME-- - PHONE E-MAIL
9000
05 M8 In Ve. CITY, STATE, ZIP _ Santa Clara, Ca 95051 FAX
STREET ADDRESS
❑ OWNER ❑ OWNER -BUILDER ❑ OWNER AGENT ❑ CONTRACTOR 11CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER TENANT
CONTRACTOR NAME David Gale •7C7 LICENSE NUMBER 981 049 LICENSE TYPE (.45
BUS. LIC # 20444
FAX
408-495-9002
COMPANY NAME E-MAIL
Cal -Neon Si ns sales calneon.com
STREET ADDRESS 1005 Martin Ave.
CITY, STATE, ZIP Santa Clara, CA 95050
PHONE 408-490-9000
ARCHITECT/ENGINEER NAME
LICENSE NUMBER
BUS. LIC #
COMPANY NAME
E-MAIL
FAX
STREET ADDRESS
CITY, STATE, ZIP
PHONE
DESCRIPTION OF WORK
New Signs 1 Illuminated wall sign
USE OF❑/ SFD Or Duplex ❑ Multi -Family
ILLUMINATED
SIGN TYPE
NO. OF
SIGN AREA
VALUATION
STRUCTURE: Commercial
(Y /N)
SI+GNS
(SQ. FT.)
M
`(CeO'DE)
V`
SIGN TYPE CODES:
V
B - BANNER SIGN M - MONUMENT (GROUND) SIGN
BL - BLADE SIGN P - PROJECTING SIGN
D - DEVELOPMENT ID SIGN SP - SPECIAL EVENT BANNER
DI - DIRECTIONAL SIGN T - TEMPORARY
E - ELECTRONIC W - WALL SIGN
READERBOARD WI - WINDOW SIGN
RECEIVEDB(Y: /
TOTAL VALUATION:
By my signature below, I certify to each of the following: I am the property owner or au orized agent to act on the property owner's behalf. I have read this
application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local
ordinances and state laws relating to building construction. I authorize repr tat es of Cupe ino to enter the above -identified property for inspection purposes.
Signature ofApplicanUAgent: IY Date: 08/28/2013
SUPPLEMENTAL INFO ION REQUIRED
OFFICE USE ONLY
PL N HECK TYPE
ROUTING SLI'
Site Plan
�r
=� ,1OVER-THE-COUNTER
BUA.Di1IC PLAN REVIEW
Elevations
Sign Details - including UL listing(s) applicable
❑ EXPRESS
'DN PLANNING PLAN REVIEW
Structural Calculations (if applicable)
❑ STANDARD
❑ OTHER:
_ Copy of Planning Approval Letter or Meeting with Planning prior to
❑ LARGE
submittal of Building Permit application.
❑ MAJOR
Sign,4pp_201 Ldoc revised 03/31/11
CITY OF CUPERTINO
�crr7r4 A mnn RITIT 71IN!`_ "1VIQInN
SIGN TYPE
19638 scb
DATE: 09/0912013
REVIEWED BY: mendez
1wADDRESS:
APN: BP#: *VALUATION: $500
*PERMIT TYPE: Building Permit PLAN CHECK TYPE:
PRIMARYPENTAMATION
Sign
Wall Sign, Electric
1 CEAP5
USE.
1
PERMIT TYPE:
WORK
Pacific Precious Metals- install 1 illuminated wall sign
Permit Fee:
$278.00
SCOPE
0,0
SIGN TYPE
FEE ID
-----
QTY/FEE
QTY
Plan C'hcek Fee:
SIGN FEE
Wall Sign, Electric
1SIGNWELEC
hrs
1
Pluinb./Ifech./ Elec
$278
Permit Fee:
$278.00
Suppl. Insp. Fee:Q Reg. ® OT
0,0
hrs
$0.00
PME Unit Fee:
$47.00
PME Permit Fee:
$47.00
("Onstr uction .I,ax:
Adfninistrative Fee:
Work Without Permit? ® Yes (j) No
$0.00
TOTALS:��
$0.00
i
Travel Documentation Fee: ITRAVDOC
$278 00
Strong Motion Fee: IBSEISMICO
tfech. Plan Check Phimb. Plan Check # Branch Circuits 11 $47.00
;Elect. Permit Fee:
Plumb. Permit Fee: IESIGN Elec. Permit Fee: IEPERMIT
C)ilaer ;Elect. Insp. Other Plumb Insp. Other Elea Insp. 0.0 $47.00
deet. Insp. Fee: Plumb. Insp. Fee: Elec. Insp, Fee:
NOTE: This estimate does not incluse fees aue to orner veparrmen/s tr.e. rtur:.«rtg, —&— - •• �, ��•••�» --� - �_. ___ __.__ __
.... � _r ___ s_ _ ___�:___:___�.:..s;,_...,.•:...........7..6/., s.d n.n nn/u nn netirnnia Cnntaet the Dent for addn't info.
"INIFsce, eee.. cuc ecu
FEE ITEMS (Fee Resolution 11-053 E . 7ff /1112)
FEE
-----
QTY/FEE
MISC ITEMS
Plan C'hcek Fee:
Suppl. PC Fee: E) Reg. ® OT
0.0
hrs
$0.00
Pluinb./Ifech./ Elec
Permit Fee:
$278.00
Suppl. Insp. Fee:Q Reg. ® OT
0,0
hrs
$0.00
PME Unit Fee:
$47.00
PME Permit Fee:
$47.00
("Onstr uction .I,ax:
Adfninistrative Fee:
Work Without Permit? ® Yes (j) No
$0.00
Sign Master Plan: ® Yes E) No
$0.00
i
Travel Documentation Fee: ITRAVDOC
$47.00
Strong Motion Fee: IBSEISMICO
$0.50
Select an Administrative Item
=420.50
$0.00 -T .,.. $
Bldg Stds Commission Fee: IBCBSC
w •
r . .a ..
$1.00
$420.50
Revised: 07/01/2013
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION
Certificate of Compliance (Sign Lighting)
(Page 1 of 4) SLTG-1C
Project N�e:
p
1 ac:t i c \ r4 t-
Date: O e� v,V /3
Project Address:
Title 24, Parts 1 and 6 of the California Code of Regulations.
1 fv P2rh-a
o �O /
Location of Sign X Outdoor Signs ❑ Indoor Signs
Name-
Phase of Sign Construction 14 New Signs ❑ Sign Alterations
Company :
x\ - u eon 5 i n 5
Cc
of Lighting Control ❑ New Lighting Controls ❑ Replaced Lighting Controls
VNot Installing Lighting Controls
-Type
This Certificate of Compliance includes the following components (check all that apply)
City/State/Zip:
❑ Mandatory Measures (Lighting Controls) ❑ Maximum Allowed Lighting Power
Specific Lighting Sources
1. Certificate of Compliance Declaration Statement (this may be a C10, C45 or other eligible person)
• I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and
correct.
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the lighting design.
• This Certificate of Compliance identifies the lighting features and performance specifications required for compliance with
Title 24, Parts 1 and 6 of the California Code of Regulations.
• The design features represented on this Certificate of Compliance are consistent with the information provided to document
this design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the
enforcement agency for approval with this building permit application.
Name-
Signature
Company :
x\ - u eon 5 i n 5
Cc
Ph ne
q� = 9000
Address:
/0,95 a.r+ e.
License number (may be contractor's lic #)
w
City/State/Zip:
Date
2. Installation Certificate (to be signed by responsible person after installation)
URN=-� (��' �5� PSL i,
T," rv. �tw 34 � ,.. k,': w ,.4L4011 N
Installation Declaration statement
• I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and
correct.
I am eligible under Division 3 of the Business and Professions Code to accept responsibility for construction, or an authorized
representative of the person responsible for construction.
• I certify that the installed features, materials, components, or manufactured devices identified on this certificate conforms to all
applicable codes and regulations, and the installation is consistent with the plans and specifications approved by the
enforcement agency.
I certify that the requirements detailed on this Certificate of Compliance have been met.
• I will ensure that a completed, signed copy of this Installation Certificate shall be posted, or made available with the building
permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand
that a signed copy of this Installation Certificate is required to be included with the documentation the builder provides to the
building owner at occupancy.
Company Name:
C i -Neon
Responsible Person's Name:
Re ponsible erson's Sign e:
License number (ma a contractor's lic #)
Date Signed:
Position With Com y.
L 419 1 0
I �
✓ a �-
2008 Nonresidential Compliance Forms October 2010
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION
Certificate of Compliance (Sign Lighting) (Page 2 of 4 SLTG-1C
Project Name:
-I-Ct I S
Date:
laqal 3
3. Mandatory Sign Lighting Controls
NOTES:
1. The same responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible
person may install the sign lighting controls than the responsible person installing the sign lighting power.
2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person
responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the
sign, general contractor, or architect shall be responsible to have the sign lighting controls installed.
3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of
Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible;
alternatively, the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance
Declaration Statement or the entire construction.
3a. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on page 1 of
4 on this SLTG-1C shall complete Part 3a. Check Yes or No for all of the following statements:
1
I have responsibility for installing the sign lighting controls
§133(a)1 and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo
❑ Yes, complete parts 3a and 3b of this form X No, complete part 3a of this form
N
There are no existing sign lighting controls and I will be installing compliant sign lighting controls
2
❑ Yes 0 No
AJ
There are no existing sign lighting controls and someone else will be responsible to install compliant sign lighting controls
3
ZYes ❑ No
Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during
There are existing sign lighting controls that do not comply with the applicable provision of § 119 and § 133 and I will be
4
installing compliant sign lighting controls
daylight hours.
❑Yes ArNo
it
There are existing sign lighting controls that do not comply with the applicable provision of §119 and §133 and someone else
5
will be responsible to install compliant sign lighting controls
N
❑ Yes M' No
3b. Mandatory Sign Lighting Controls
If the person signing the Certificate of Compliance Declaration Statement on page 1 of 4 of this SLTG-1C is responsible for
the sign lighting control requirements, that person shall answer all of the following questions:
-complyingwith
If there are construction documents, indicate where on the building plans the
mandatory measures(sign lighting control note block can be located:
§133(a)l. All indoor sign lighting is controlled with an automatic time switch control that complies with the
Y
N
NA
1
applicable requirements of § 119.
❑
❑
M�'
§133(a)1 and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo
Y
N
NA
control, or an outdoor astronomical time switch, that comply with the applicable requirements of § 119.
AJ
❑
❑
2
Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during
Y
NA
daylight hours.
❑
it
§133(a)3. All outdoor signs are controlled with a dimmer that provides the ability to automatically reduce
Y
N
NA
sin power by a minimum of 65 percent during nighttime hours.
if
❑
El
Exception 1 to §133(a)3. Signs illuminated for less than one hour per day during daylight hours.
Y
NA
3em0
Exception 2 to §133(a)3. Outdoor signs in tunnels or large covered areas that require illumination during
Y
NA
daylight hours.
❑ 1
6
Exception 3 to §133(a)3. Only metal halide, high pressure sodium, cold cathode, or neon lamps used for
Y
NA
illuminating signs or parts of signs.
❑
§133(a)4. An Electronic Message Center (EMC) having a new connected lighting power load greater than
Y
N
N/A
15 kW has a control installed capable of reducing the lighting power by a minimum of 30 percent when
❑
❑
4
receiving a demand response signal that is sent out by the local utility.
Exception to §133(a)4. EMC required by a health or life safety statue, ordinance, or regulation, including
Y
NA
but not limited to exit signs and traffic signs.
❑
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION
Certificate of Compliance (Sign Lighting) Pae 3 of 4 SLTG-1C
Project Name Date:
6LL opt L
4. Maximum Allowed Li2htin2 Power Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 5
of this Certificate of Compliance if there are signs using the S ecific lighting sources method of com liance
A
B
C
D E F G
H
I
J
A
Allowed Watts
Design
Complies?
w
Watts
Y / N
_
Q>
42Field
VIChecktl
Inspector--_
'
atJo
W
Cc
0
3N
-�0U o3
Sign
.a
,-��a33�
'
" o�n
Complies
N
y c3
II II
3
o II
Ci
✓
o
U
Description
✓
❑
❑
❑
❑
❑
❑
A
Symbol or code used on the plans (when plans are required) and other documents.
B
A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents.
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that
the sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power
method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized
by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National
C
Standards Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual
inspection program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY
VERIFIED label, columns `D' through `I' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional
method to validate compliance. An ENERGY VERIFIED label is not needed for compliance.
D
The sign area in square feet.
E
List "I" if the sign is internally illuminated. List `B" if the sign is externally illuminated.
F
Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E.
G
Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) in column F.
H
Show the total installed watts in the sign, as determined according to the applicable provisions of § 130(d or e).
I
1 Enter Y if the number in column H is less than orequal to the number in column G. Otherwise, the sign does not comply.
J
I This page doubles as a field inspection checklist.
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
STATE OF CALIFORNIA
CERTIFICATE OF COMPLIANCE, SIGN LIGHTING
CEC-SLTG-1C (Revised 10/10) CALIFORNIA ENERGY COMMISSION
Certificate of Compliance (Sign Lighting) (Page 4 of 4 SLTG-1C
Project Nam •
"rac
Date:
r c r C l 0 v /hRaaj To
5. Specific Lighting Source Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 4 of this
Certificate of Compliance if there are signs using the maximum allowed lighting ower method of compliance)
A
B
C
D
E
OPTIONAL
Field
ENERGY
Specific light source used for
Inspector
Symbol
VERIFIED
compliance
Check that
or
Description
label
Shall include only lighting
Slgtl
Code
(see instructions
technologies listed below
`
Complies
below)
List all that apply
n
❑
❑
❑
❑
A
Symbol
or code used on the plans (when plans are required) and
other documents.
B
A narrative description of the sign,or location of sign on the building; and the location of sign on construction documents
C
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed ENERGY VERIFIED label, confirming that
this sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Specific Lighting Source Method of
Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by
Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards
Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection
program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label,
column `D' is not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An
ENERGY VERIFIED label is not needed for compliance.
Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies:
List all applicable numbers 1 through 10 that apply in column D above for each row.
I High pressure sodium lamps
2 Pulse start or ceramic metal halide lamps served by a ballast with > 88% efficiency
Pulse start metal halide lamps that are _< 320 watts, are not 250 watt or 175 watt lamps, and are served by a ballast
3
with > 80% efficiency
4 Neon or cold cathode lamps with transformer or power supply efficiency>_ 75% with rated output current < 50 mA
S 1 Neon or cold cathode lamps with transformer or power supply efficiency>_ 68% with rated output current > 50 mA
DFluorescent
lamps with a minimum color rendering index (CRI) of 80
6 (Note: when using electronic ballasts for compliance, lamps with a CRI < 80 may be used
7 Light emitting diodes(LEDs) with a power supply with > 80% efficiency
Single voltage LED external power supplies designed to convert 120 volt AC input into lower voltage DC or AC
8 output, having a nameplate output power less than or equal to 250 watts, and certified to the Energy Commission as
complying with the applicable requirements of the Appliance Efficiency Regulations Title 20
9 Compact fluorescent lamps that do not contain a medium screw base sockets E24/E26
10 1 Electronic ballasts with a fundamental output frequency > 20 kHz
EI
This page doubles as a field inspection checklist.
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
1%
BUILDING DIVISION - CUPERTINO
APPFIOVED
This set of plans and specifications MIDST be kept at t"e
job site during construction. It is unlawfifl n
changes or alterations on same, or to
therefrom, without approval from tine l✓uii ir;
The stamping of this plan
1 Elevation View Scale: 3/4"=1'
4ty.1
Aluminum face -lit channel letters and Logo box internally illuminated with LED lighting
system. To be installed with aluminum raceway painted to match building.
Logo Box: Face is 3/16" thick #7328 White acrylic with translucent digital print vinyl graphics
and Black trim -cap. Black returns.
"PACIFIC": Faces are 3/16" thick #7328 White acrylic with Black trim -cap. s.
"PRECIOUS...": Faces are 3/16" thick #7328 White acrylic with Gold translu Poverlay
dBl kitBI k t —40
Wall
13/8° 2" aluminum
angle painted
ito match building
011 1'/2' aluminum
I angle painted
5 to match building
CUPERTINO
Building Department
an ac rm-cap. ac re urns.
20.16 SgFt SEP 0 9 2013
REVIEWED FOR CODE COMPLIANCE
Reviewed By: -, ' v
5"
QATE
� a Side View
PLOT ;NLAII�
A By
BLDG. UEM
24'-0" Frontc
...,...-. . � t5 P1fJ. P,RYIYn
ITEP A C I F I C
'IJUS
Pacific Precious Metals -19638 Stevens Creek Blvd, #270, Cupertino, CA Date: 8/30/13 Sheet 2 of 4 COPYRIGHT NOTICE: THIS IS AN ORIGINAL UNPUBLISHED DRAWING
IKN-99KNI
•• SUBMITTED FOR USE IN CONNECTION WITH A PROJECT PLANNED
a � Dg o '• pog/ r� BY CAL -NEON SIGNS. IT IS NOT TO BE SHOWN TO ANYONE OUTSIDE
G���File Name.: , Rev
• i , . • � � pEMM &IEF.VIUMMgT= YOUR ORGANIZATION, NOR IS IT TO BE COPIED, REPRODUCED, OR
ESl<TNZ1f[e=111111112MH- EXHIBITED IN ANY FASHION WITHOUT THE WRITTEN PERMISSION
—� [d=-Tf'VJRMM'IM"�� OF AN AUTHORIZED OFFICIAL OF CAL -NEON SIGNS.
• 11 1 1%• [I=81178ME:3 A
Power by
1/4" x 2" lag bolts---,, others
1'/z"x11/2' aluminum angle
painted to match building
2"x2" aluminum angle
painted to match building
Waterproof flex painted
to match building
Self -tapping screws
Waterproof low voltage
cable connected to back
of letter through raceway
wall and to each letter
and to low voltage
transformer inside raceway
External shut-off switch
ff,1 11011
Aluminum channel letter/light box
Exterior color: Black
Interior color: White
Letter attached to raceway with
aluminum screws - min 4 per letter
White LED illumination
3/16" Acrylic face
with Black Trim -cap
—Weep hole
5"
5" All components @approved
1 b Electrical/Attachment Detail - Illuminated Set
Approx. weight: 2 lbs per letter
Note: This sign is intended to be installed in accordance with the
of Article 600 of the National Electrical Code and/or other
local codes. This includes proper grounding and bonding
CUPERTINO
Building Departrnent
SEP 0 9 2013
REVIEWED FCR CODE COMPLIANCE
Reviewed By:
'
a ✓
v
I -
,..�., .
L++Cy�V��
O
5
V `~
Stevens'Cfeek Blvd
<.
a211
NO' E=Aj
ELECTRIC SIGNS OF ALL KINDS SINCE '19 55
+
Stevens Creek Blvd
v
I -
t,.
5
Pacific Precious Metals -19638 Stevens Creek Blvd, #270, Cupertino, CA Date: 8/30/13 Sheet 4 of 4
■�� 0 � �'
mt1p,Q WINE M�<Jl I
N�011
COPYRIGHT NOTICE: THIS IS AN ORIGINAL UNPUBLISHED DRAWING
SUBMITTED FOR USE IN CONNECTION WITH A PROJECT PLANNED
BY CAL -NEON SIGNS. IT IS NOT TO BE SHOWN TO ANYONE OUTSIDE
YOUR ORGANIZATION, NOR IS IT TO BE COPIED, REPRODUCED, OR
EXHIBITED IN ANY FASHION WITHOUT THE WRITTEN PERMISSION
OF AN AUTHORIZED OFFICIAL OF CAL -NEON SIGNS.
Building Department
City Of Cupertino
10300 Torre Avenue
Cupertino, CA 95014-3255
Lo Telephone: 408-777-3228
C U P E RT 1 N O Fax: 408-777-3333
CONTRACTOR / SUBCONTRACTOR LIST -
*Our municipal code requires all businesses working in the city to have. a. City._ of Cupertino, business license.
NO BUILDING FINAL OR FINAL OCCUPANCY INSPECTION(S) WILL BE SCHEDULED UNTIL THE
GENERAL CONTRACTOR AND ALL SUBCONTRACTORS HAVE OBTAINED A CITY OF CUPERTINO
BUSINESS LICENSE. p
I am not using any subcontractors:
Signature Date
Please check applicable subcontractors and complete the -following information 4
SUBCONTRACTOR BUSINESS NAME k BUSINESS LICENSE #
Cabinets & Millwork
Cement Finishing .
Electrical
Excavation
Fencing
Flooring / Carpeting
Linoleum / Wood
Glass / Glazing
Heating
Insulation
Landscaping
Lathing
Masonry
Painting / Wallpaper
Paving
Plastering
Plumbing
Roofing
Septic Tank
Sheet Metal
Sheet Rock
Tile
Owner / Contractor Signature
Date
k .
GENERAL CONTRACTOR:(,,,, .sk" -
. ... ;
11.11 ��• � . ♦ �_ _��n��t�.ui.L=aG�ll_
.f. I f. ,-i-_/. � _ . _ •
*Our municipal code requires all businesses working in the city to have. a. City._ of Cupertino, business license.
NO BUILDING FINAL OR FINAL OCCUPANCY INSPECTION(S) WILL BE SCHEDULED UNTIL THE
GENERAL CONTRACTOR AND ALL SUBCONTRACTORS HAVE OBTAINED A CITY OF CUPERTINO
BUSINESS LICENSE. p
I am not using any subcontractors:
Signature Date
Please check applicable subcontractors and complete the -following information 4
SUBCONTRACTOR BUSINESS NAME k BUSINESS LICENSE #
Cabinets & Millwork
Cement Finishing .
Electrical
Excavation
Fencing
Flooring / Carpeting
Linoleum / Wood
Glass / Glazing
Heating
Insulation
Landscaping
Lathing
Masonry
Painting / Wallpaper
Paving
Plastering
Plumbing
Roofing
Septic Tank
Sheet Metal
Sheet Rock
Tile
Owner / Contractor Signature
Date
k .