14040131CITY OF CUPERTINO BUILDING PERMIT
BUILDING ADDRESS: 19028 STEVENS CREEK BLVD
CONTRACTOR: ALLEN SIGNS INC
PERMIT NO: 14040131
OWNER'S NAME: BEN SITYY
1982 STONE AVE
DATE ISSUED: 04/22/2014
OWNER'S PHONE: 4089968999
SAN JOSE, CA 95125
PHONE NO: (408)280 -6500
L . LICENSED CONTRACTOR'S DECLARATION
JOB DESCRIPTION: RESIDENTIAL COMMERCIAL
REPLACE (E) ILLUMINATED WALL SIGN WITH (N) LED
_
License Class �9'S Lie. # 8'J
CHANNEL LETTER SIGN
Contractor Date 2
I hereby affirm that I a licensed under the provisions of Chapter 9
(commencing with Sect n 7000) of Division 3 of the Business & Professions
Code and that my license is in full force and effect.
I hereby affirm under penalty of perjury one of the following two declarations:
I have and will maintain a certificate of consent to self - insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
performance of the work for which this permit is issued.
Sq. Ft Floor Area:
Valuation: $2000
I have and will maintain Worker's Compensation Insurance, as provided for by
APN Number: 37511071 00
Occupancy Type:
Section 3700 of the Labor Code, for the performance of the work for which this
permit is issued.
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above information is
PERMIT EXPIRES IF WORK IS NOT STARTED
correct. I agree to comply with all city and county ordinances and state laws relating
WIT ERMIT ISSUANCE OR
to building construction, and hereby authorize representatives of this city to enter
AYS T LED INSPEC ION.
upon the above mentioned property for inspection purposes. (We) agree to save
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
and expenses which may accrue against said City in consequence of th
Date: ZZ `
granting of this permit. Additionally, the applicant understands and will comply
with all non -point source regulations per the Cupertino Municipal Code, Section
9 18.
Signature Date �f' ay
RE- ROOFS:
All roofs shall be inspected prior to any roofing material being installed. If a roof is
installed without first obtaining an inspection, I agree to remove all new materials for
inspection.
El OWNER UILDER DECLARATION
Signature of Applicant: Date:
I hereby affirm that I am exempt from the Contractor's License Law for one of
the following two reasons:
ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER
1, as owner of the property, or my employees with wages as their sole compensation,
will do the work, and the structure is not intended or offered for sale (Sec.7044,
Business & Professions Code)
I, as owner of the property, am exclusively contracting with licensed contractors to
HAZARDOUS MATERIALS DISCLOSURE
construct the project (Sec.7044, Business & Professions Code).
I have read the hazardous materials requirements under Chapter 6.95 of the
California Health & Safety Code, Sections 25505, 25533, and 25534. I will
I hereby affirm under penalty of perjury one of the following three
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
declarations:
Health & Safety Code, Section 25532(a) should I store or handle hazardous
I have and will maintain a Certificate of Consent to self - insure for Worker's
material. Additionally, should I use equipment or devices which emit hazardous
Compensation, as provided for by Section 3700 of the Labor Code, for the
air contaminants as defined by the Bay Area Air Quality Management District I
performance of the work for which this permit is issued.
will maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and
I have and will maintain Worker's Compensation Insurance, as provided for by
the Health & Safety Code, Sections 50 , 25533 nd 25534.
`
Section 3700 of the Labor Code, for the performance of the work for which this
Owner or authorized agent: Date:
permit is issued.
I certify that in the performance of the work for which this permit is issued, I shall
not employ any person in any manner so as to become subject to the Worker's
CONSTRUCTION ENDING AGENCY
Compensation laws of California. If, after making this certificate of exemption, I
I
I hereby affirm that there is a construction lending agency for the performance of
become subject to the Worker's Compensation provisions of the Labor Code, must
work's for which this permit is issued (Sec. 3097, Civ C.)
forthwith comply with such provisions or this permit shall be deemed revoked.
Lender's Name
APPLICANT CERTIFICATION
Lender's Address
I certify that I have read this application and state that the above information is
correct. I agree to comply with all city and county ordinances and state laws relating
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
ARCHITECT'S DECLARATION
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
costs, and expenses which may accrue against said City in consequence of the
I understand my plans shall be used as public records.
granting of this permit. Additionally, the applicant understands and will comply
with all non -point source regulations per the Cupertino Municipal Code, Section
Licensed Professional
918.
Signature Date
CUPERTINO
SIGN PERMIT APPLICATION
COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION
10300 TORRE AVENUE • CUPERTINO, CA 95014 -3255
(408) 777 -3228 • FAX (408) 777 -3333 • building acupertino.org
�U
'�1 S
PROJECT ADDRESS D- a ^ -
(S
APN #
T
OWNER NAME ?el
PHONE o _9 96- p� p71
67 !
E -MAII.
STREETADDRESS�` M /a L1 •
V Q
CTI'Y ST�ATE,OZIP
FAX
CONTACT NAME
PHO
E -MAIL
STREET ADDRESS
cITY, STATE, ZIP
FAX
❑ OWNER ❑ OWNER- BUILDER ❑ OWNER AGENT ❑ CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT
CONTRACTOR NAME
LICENSE NUMBER
LICENSE TYPE
BUS. LIC #
1
CO.WANY NAn �'
IfA
E -MAIL
FAX
STREET ADDRESS
2
CITY, STATE, ZIP SGDS
PHONE
-z 0 010
ARCHITECT/ENGINEER NAME
LICENSE NUMBER
BUS. LIC # -
COMPANY NAME
E -MAIL
FAX
STREET ADDRESS
CITY, STATE, ZIP
PHONE
DESCRIPTIO1. OF W
USE OF ❑ SFD or Duplex' ❑ Multi - Family
ILLUMINATED
SIGN TYPE
NO. OF
SIGN AREA
VALUATION
STRUCTURE: ❑ Commercial.
(Y / N)
(CODE)
SIGNS
(SQ. FT.)
(S)
SIGN TYPE CODES:
B - BANNER SIGN M - MONUMENT (GROUND) SIGN
BL - BLADE SIGN P - PROJECTING SIGN
D - DEVELOPMENT ID SIGN SP - SPECIAL EVENT BANNER
DI - DIRECTIONAL SIGN T - TEMPORARY
E - ELECTRONIC W - WALL SIGN
READERBOARD WI - WINDOW SIGN
TOTAL VALUATION:
By my signature below, I certify to each of the following: I am the property owner or authorized ag on the properly owner's behalf. I have read this
application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree to comply with all applicable local
ordinances and state laws relating to bull nstruction. authorize representatives of Cupertino to enter the above -ide tified roperty for inspection purposes.
`
Signature of Applicant/Agent: Date:
SUPPLEMENTAL INF ION REQUIRED
Plan
_Site
Elevations;
>tESS
' D GPL$NREVIEW
Sign Details - including UL listing(s) applicable
=
— Structural Calculations (if applicable)
— Copy of Planning Approval Letter or Meeting with Planning prior to
-
I�
submittal of Building Permit application.
mw
Sign,4pp_2011.doc revised 03116111
T-17-7-77/1
..
CITY OF CUPERTINO
TTT r, crr7Aii A TnD DITII "1T%T 11TV> g1nN
Xf <, 1J . P cv,i Check
C)dw, llee<'r't.
Tech, Ins'p,
Pbiwb. Plan (34ect
Tiumt>, Permit Fee:
Other P1umb 1rup
Pluoth, hi sp. T -ee:
# Branch Circuits 11 $47.00
IESIGN Elec. Permit Fee: 1EPERMIT
Other Elec. Insp. 0.0 $47.00
1,11?(. Ins "), I.c:e:
o_ o,.. n:..f,... Q..t.�.�l
NOTE: This estimate does not include fees aue to otner vepartmenn (i.e. rtunutr1g, �..�.. .. �• �• »•� - - -., �_.. _. _ ____ ___, _ _-
J _ r... s 4 ---1 -1 fh, n—f fnr add" 1 inFn_
District, etc-). lnese ees are aasea on the preurrurtu,
FEE ITEMS (Fee Resolution 11 -053 Ef. 7/f 1/13)
srr ..rrr��.��•• w.w.��
FEE
»• - -
QTY/FEE
_ -__ ___
MISC ITEMS
ADDRESS: 19028 STEVENS CREEK BLVD
DATE: 04/22/2014
REVIEWED BY: MELISSA
Suppl. PC Fee: E) Reg. 0 OT
APN: 375 11 071
BP #:
"VALUATION: $2,000
*PERMIT TYPE: Building Permit
fat 4N C11i °C`K 7T1'1'-'
PRIMARY
$278.00
Suppl. Insp. Fee-.0 Reg. Q OT
PENTAMATION 1 CEAP5
hrs
Sign
PERMIT TYPE: i
USE.
PME Permit Fee:
$47.00
("C)HS0111t7 if it IX.
WORK
,4(hp,inistrfrill e. `'£e:
Work Without Permit? ® Yes No
$0.00
SCOPE
$0.00
A
Xf <, 1J . P cv,i Check
C)dw, llee<'r't.
Tech, Ins'p,
Pbiwb. Plan (34ect
Tiumt>, Permit Fee:
Other P1umb 1rup
Pluoth, hi sp. T -ee:
# Branch Circuits 11 $47.00
IESIGN Elec. Permit Fee: 1EPERMIT
Other Elec. Insp. 0.0 $47.00
1,11?(. Ins "), I.c:e:
o_ o,.. n:..f,... Q..t.�.�l
NOTE: This estimate does not include fees aue to otner vepartmenn (i.e. rtunutr1g, �..�.. .. �• �• »•� - - -., �_.. _. _ ____ ___, _ _-
J _ r... s 4 ---1 -1 fh, n—f fnr add" 1 inFn_
District, etc-). lnese ees are aasea on the preurrurtu,
FEE ITEMS (Fee Resolution 11 -053 Ef. 7/f 1/13)
srr ..rrr��.��•• w.w.��
FEE
»• - -
QTY/FEE
_ -__ ___
MISC ITEMS
Plan C:`hcc k Fee:
Suppl. PC Fee: E) Reg. 0 OT
0.0
hrs
$0.00
Ph unh.
Permit Fee:
$278.00
Suppl. Insp. Fee-.0 Reg. Q OT
0,0
hrs
$0.00
PME Unit Fee:
$47.00
PME Permit Fee:
$47.00
("C)HS0111t7 if it IX.
,4(hp,inistrfrill e. `'£e:
Work Without Permit? ® Yes No
$0.00
Sign Master Plan: ® Yes (F) No
$0.00
A
Travel Documentation Fee: ITRAVDOC
$47.00
Strong Motion Fee: IBSEISMICO
$0.50
Select an Administrative Item
$0.00 s „ TOTAL FEE ;LL $420.50
Bldg Stds Commission Fee: IBCBSC
$1.00
$420.50
mevl5eu. V41U ucv i•r
Certificate of Compliance :5i n Li gh tin
(Page 1 of 4) SLTG -1C
Project Name:
Living Color
Date: 4 -22 -14
Project Address:
Title 24, Parts 1 and 6 of the California Code of (Regulations.
19028 Stevens Creek Blvd, #C, Cupertino, CA
this design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the
Location of Sign 1 Outdoor Signs 13 Indoor Signs
Name:
Phase of Sign Construction ® New Signs 13 Sign Alterations
Signature
T of Lighting Control M New Lighting Controls D Replaced Ligbting Controls
a Not InstaHing Lighting Controls
This Certificate of Compliance includes the following components (check all that apply)
Company:
6 Ivlandatory Measures (Lighting Controls) D'Ivlaximum Allowed Lighting Power
ID Specific Lighting Sources
1. Cerd t ate of CoopHan a Dedaradva dement (this maybe a CIO, C45 or offer eligible person)
® I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and
correct.
A I am eligible under Division •3 of the•California Business and Professions Code to accept responsibility for the lighting design_
N This Certificate of Compliance identifies the lighting features and performance specifications required for compliance with
Title 24, Parts 1 and 6 of the California Code of (Regulations.
® The design features represented on this Certificate of Compliance are consistent with the information provided to document
this design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the
enforcement agency for approval with this building permit application.
Name:
`
Signature
K-im
* I certify that the requirements detailed on this Certificate of Compliance have been met.
* 1 will ensure that a completed, signed copy of this installation Certificate shall be posted, or made available with the building
Company:
that a signed copy of this Installation Certificate -is required -to be- included with the documentation the builder provides to the
Phone
Allen Signs, c
Allen Signs, Inc
408- 280 -6500
Address:
1982 Stone Ave
License number (may be contractor's lic #)
C-45, 834580
City /State /Zip:
Date
an Jose, CA 95125
2. Instelff aiion CetE'tificate (to;be signed by utter installation)
lttniiti'tl9E�r �� "�,�� �
C�C1Ce(1;tfYlASte
Uw
InsLBilation Declaration statement
K I certify under penalty,of perjury, under the laws of the State of California, the information provided on this form is true and
correct.
K l am eligible under Division 3 of the Business and Professions Code to accept responsibility for construction, or an authorized
representative of the person responsible for construction.
9 I certify that the installed features, materials, components, or manufactured devices identified on this certificate conforms to all
applicable codes and regulations, and the installation is consistent with the plans and specifications approved by the
enforcement agency.
* I certify that the requirements detailed on this Certificate of Compliance have been met.
* 1 will ensure that a completed, signed copy of this installation Certificate shall be posted, or made available with the building
permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand
that a signed copy of this Installation Certificate -is required -to be- included with the documentation the builder provides to the
building owner at occupancy.
Company Name:
Allen Signs, Inc
Responsible .Person's Name:
Responsible Pe '
License number {may be cto?s lic #)
Date Signed:
Position with Comp
834580
Project Manag
2008 Nonresidential Compliance Forms October 2010
Certificate of Com fiance (Sign Li hdn (Page 2 of 4 SLTG -iC
Project Name: jiving Color
Dom: 4 =22 -14
3. Manq!Loij ne Lighting Controls
NOTES.
1. The same responsible person may install both the sign lighting power and the sign lighting controls, or a different responsible
person may install the sign lighting controls than the responsible person installing the sign lighting power.
2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person
responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the
sign, general contractor, or architect shall be responsible to have the sign lighting controls installed
3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of
Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible,
alternatively, the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance
Declaration Statement or the entire construction:
3a. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on page f of
4 on this SLTG -IC shall complete Part 3a. Check Yes or No for all of the following statements:
1
I have responsibility for installing the sign lighting co
§133 (a)1 and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo
Yes complete parts 3a and 3b of this form complete part 3a of this form
2
1 Tirre are no existing sign lighting controls and I w'll a installing compliant sign lighting controls
,
Yes
3
There are no existing sign lighting controls and someonVN will be responsible to install compliant sign lighting controls
a
Cl Yes El No
Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during
There are existing sign lighting controls that do not comply with the applicable provision of § 119 and § 133 and I will be
4
installing compliant sign lighting controls
daylight hours.
0 Yes Eli No
Kl
There are existing sign lighting controls that do not comply with the applicable provision of § 119 and § 133 and someone else
5
will be responsible to install compliant sign lighting controls
N
0 Yes 53 No
3b. Mandatory Sign Lighting Controls
If the person signing the Certificate of Compliance Declaration Statement on page I of 4 of this SLTG -1 C is responsible for
con 1 in _with.the- sign. lighing control uirements . that . shall, answer. all..of . the. followin . uestions:
If there are construction documents, indicate where on the building plans the
mandato measures si .a :li htin control, :note block can be located:
§I33(a)l. All indoor sign lighting is controlled with an automatic time switch control that complies with the
'Y
N
NA
l
applicable -r uirements of § 119,
Q
:0
M
§133 (a)1 and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo
Y
N
NA
,
control, or an outdoor astronomical time switch, that comply with the applicable reWirements of § 119.
M
E3
a
2
Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during
Y
NA
daylight hours.
0
Kl
§133(x)3. All outdoor signs are controlled with a dimmer that provides the ability to automatically reduce
Y
N
NA
,sign over by a minimum of 65 percent during nighttime hours.
D
M
Exception, 1 to. 1;33 Si illuminated. for less.than. one. hour da. daylight, hours.
P § f - l l y
Y
is
NA
0
3
Exception 2 to §133(a)3. Outdoor signs in tunnels or large covered areas that require illumination during
Y
NA
daylight hours.
.❑
Exception 3 to §133(a )3. Only metal halide, high pressure sodium, cold cathode, or neon lamps used for
Y
NA
illuminating signs or parts of signs.
B
0
§133(a)4. An Electronic Message Center (EMC) having a new connected lighting power load greater than
. Y
N
NIA
15 kW has a control installed capable of reducing the lighting power by a minimum of 30 percent when
4
receiving a demand res nse ! i 1 that is sent out by the local
Exception to §133(a)4. EMC required by a health or life safety statue, ordinance, or regulation, including
Y
NA
but not limited to exit signs and traffic signs,
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 201.0
ertificate V C . . to f ..a 1111 Lighting) PA v 3 of 4 LTV -I
Project Name:
Living Color
Date:
4-22 -14
4 Ml3zimutlr>E Ailoedt i"flvt' ,lieu f
Certiflicate of Coke and Field Inspection Energy Checklist
Complete this part-if therw a€e signs using the maximum allowed lighting power method of compliance. Complete -5
.
of this Certificate of Complianceif there are signs using the Specific ti ' sources method of cote liartce
A
B
E
F
�
H
I
J
A
Allowed Watts
Design
Complies?
Watts
Y / N
>
V{
10
...
0
CA
Field,
d
3
3
::
Inspector
rsJ
a
,2 u
w
° u
""
a
Check that::
...
¢
¢
Csign es
D ' tion
Internally Illuminated Letter Sign
p
a'
Q
D
Cl
0
Ci
Q
D
A
Symbol or code used on the plans when. plans are and other documents.
8
A narrative description of the sign, or location of si-gn on the buildin - and the location of sign on construction documents.
OPTIONAL _ Check this box only if this sign-has a permanent, pre- printed, factory- installed, ENERGY VERIFIED label; confirming that
the sign complies with the Section, 148 of the California 2008 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power
method of compliance. Theanly labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized
C
by Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National
Standards Institute in accordance with 180/112C 1701 1. Surveillance by the Accredited Certification Body shall be an ongoing annual
inspection program, carried out by Type A Inspection body in accordance with ISO /iEC 17020. For signs with such an ENERGY
VERIFIED label, columns `D' through `I' are not required to be filled out. Note. Using an ENE GY VERIFIED label is an optional
method to validate compliance. An ENERGY VERIFIED label is not needed for compliance.
D
The sign area in um -feet.
E
List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated.
F
Allowed watts per agave foot Enter. -12 if the signis listed as "1,' is column E. Enter 2:3 if siga is listed as "E" in column: E.
G
Multiply the square footage in column D times the allowed Lighting Power Density LPD = watts in column F.
*
Show the total installed watts :iri-�ffie' sign, as deteradned-according to the applicable provisions of § 13 d or e).
I
Enter Y if the number in column H is less that or equal to the number in column G. Otherwise the sign does not comply.
I
I This page doubles-wwfiel&inspection checklists
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
Certificate of Co Hance (Sign Lighting) e 4 of 4 SLTG -lC
Project Name:
Living Color
Date:
4-22 =14
5. ghting Source Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the Specific tiger soya= method of co ace. (Complete part 4 of this
Certificate of Compliance if there are signs using the maximum allowed li ghting power method of compliance)
A
B
C
D
E
OMONAL
Field
ENERGY
Specific light source used for
Inspector
Symbol
VERIFIED
compliance
Check that
or
Description
label
Shall include only lighting
Sign
Code
(see instructions
technologies listed below
complies
below)
List all that apply
Internally Illuminated Letter Sign
❑
>I
Q
❑
13
❑
a
L7
1
A
Symbol
or code used on the plans when plans are required) and
other- documents.
R
A narrative description of the sign, or Iocation.of sign, on.the buildin • and the, location of sign on construction_documents
C
OPTIONAL -Check this box only if this sign has a permanent, pre- printed, factory - installed ENERGY VERIFIED label, confin ing that
this sign complies with the Section 148 of the California 2008 Title 24, Part 6 Standards, using the Specific Lighting Source Method of
Compliance. The only labels that will be recognized for this purpose are ENERGY VERUUD Certification Marks authorized by
Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/lEC Guide 65 by the American National Standards
Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection
program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label,
column `D' is not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An
ENERGY VERIFIED label is not needed for co liance.
Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies:
List all awfirable numbers i through 10 that apply in column D above for each row.
I
H pressure sodium 'lamps
2
Pulse start or ceramic metal halide lamps served by a ballast with >_ 88% efficiency
Pulse start metal halide lamps that are <_ 320 watts, are not 250 watt or 175 watt lamps, and are served by a ballast
3
with > 80% efficiency
4
Neon or cold cathode lamps with transformer or power su l effcienc > 751% with rated output current < 50 mA
5
Neon or cold cathode laM with transformer or wer sup l efficient >_ �8% with rated ou ut current ? 50 mA
D
Fluorescent lamps with a minimum color rendering .index (CRI) of 80
6
(Note: when using electronic ballasts for compliance, lamps with a CRI < 80.may be used)
7
Light emiqjgS diodes JEDs) with a p2wer al with ? 80% efficient
Single voltage LED external power supplies designed to convert 120 volt AC input into lower voltage DC or AC
8
output, having a nameplate output power Less than or -equal to 250 watts, and certified to the Energy Commission as
complying in with the .applicable requirements of the -Appliance Efficiency Regulations (Title 20)
9
Compact fluorescent lamps that do not contain: a medium screw base sockets: 4T2
10
Electronic ballasts with a fundamental output frequency:-::: 20 kHz
E
This
a doubles as a field inspection checklist.
Field Inspector Notes:
2008 Nonresidential Compliance Forms October 2010
N
LIVING COLOR BUILDING SIGN ELEVATION: 19028 STEVENS CREEK #C CITY OF CUPERTINO
RACEWAY PAINTED
SAME COLOR A5 BACK WALL
5" THICK INDIVIDUAL CHANNEL LETTERS, LED FOR INTERNALLY ILLUMINATION.
3/4" WHITE COLOR TRIM -CAP, RETURN PAINTED WHITE COLOR, LETTERS WILL BE RED COLOR
5CALE:1 /4 " =1' -0" DATE APR -15 -2014
Am. )
N s
W--E
201
Ct��
Cdr I,
Living Color
19028 Stevens Creek #c
City Of Cupertino
OFFICE
Existing Double Side Street Sign 404 lu,QL1A10 -y-r---;:�>
' Living Color
O
strong Feet
WHITE COLOR 1/5" THICK ALUMINUM PANEL
WITH COLOR LOGO & RED COLOR LETTER5
SCALE: 1 /4 " =1' -0" DATE: APR -15 -2014
6UILDING WALL �yvte S UY�` -''
ALUMINUM RETURN
CHANNELLETTER5
PLASTIC FACE —
#10x3 "SCREW
MIN. 3 PER LETTER
5 HEET METAL RACEWAY II��JI
RN IRON 6RACKET
114'1 1/4 "x3" TOGGLE BOLT
tp., 6 �� AT TOP & DOTTON
�a a . bX
s r�• y
LOW VOLTAGE
TKAN5FORMER WITH
015COUNT 5WITCH
CUPERTING
_qUII("'ng De
Fartment.
APR 2 2 2014
REVIE'VVEO r =pK COC3E CC7t1 PUANCE
Reviewed By: C ��
MOUNTING DETAIL '�•�
ha G E N t
V ���"� -�
OT n
All designs tl belong to Allen Signs, Inc. Any duplication is prohibited. COPY RIGHT 2012
All designs & art works belong to Allen Signs,
any duplication isprobibited. COPYRIGHT2010
E- mailaddress: allensigns @yahoo.com
Te1:408 1280 -6500 Fax:4081280 -6700
1982 Stone Ave. San Jose, Ca. 95125 State Lic. # 834580