14010099CI'T'Y OF C UP ERTINO BUILDING PERMIT
BUILDING ADDRESS: 21820 OAKVIEW LN
CONTRACTOR: RICHARD HARO
PERMIT NO: 14010099
CONSTRUCTION
OWNER'S NAME: CHRIS TSAN
2150 MANGIN WAY
DATE ISSUED: 04/16/2014
OWNER'S PHONE: 4084315172
SAN JOSE, CA 95148
PHONE NO: (408) 532 -1755
LICENSED CONTRACTOR'S DECLARATION
JOB DESCRIPTION: RESIDENTIAL E] COMMERCIAL ❑
CONSTRUCT 847 SQ FT OF ONE STORK ADDITION,
License Class Liic. # 70A a 7
KITCHEN
'(LLG~'�i �� �-
REMODEL 108 SQ, BATHROOM 130 SQ AND OTHER 270
Contractor TtD �fIwo gpeg. Date
SQ
I hereby affirm that I am licensed under the provisions of Chapter 9
FT
(commencing with Section 7000) of Division 3 of the Business & Professions
Code and that my license is in full force and effect.
I hereby affirm under penalty of perjury one of the following two declarations:
I have and will maintain a certificate of consent to self - insure for Worker's
Compensation, as provided for by Section 3700 of the Labor Code, for the
Sq. Ft Floor Area:
Valuation: $160000
erformance of the work for which this permit is issued.
1 have and will maintain Worker's Compensation Insurance, as provided for by
Section 3700 of the Labor Code, for the performance of the work for which this
APN Number: 32619110.00
Occupancy Type:
permit is issued.
APPLICANT CERTIFICATION
1 certify that I have read this application and state that the above information is
PERMIT EXPIRES ](]Ei WORK IS NOT S'p'AR')(']ED
correct. 1 agree to comply with all city and county ordinances and state laws relating
WITHIN ��® ���� ®� ��� OR
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
]�� ®� A]L][,jE S]P]E��][ ®�.
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
costs, and expenses which may accrue against said City in consequence of the
fl /
granting of this permit. Additional) , the applicant understands and will co
by: Date: 16 (9
with all non -point source regulatioll per the Cupertino Municipal Code, Se
9.18.
-71 6 1
1- OOFS:
Signature Date b
All roofs shall be inspected prior to any roofing material being installed. If a roof is
installed without first obtaining an inspection, I agree to remove all new materials for
inspection.
❑ OWNER - BUILDER DECLARATION
Signature of Applicant: Date:
I hereby affirm that I am exempt from the Contractor's License Law for one of
the following two reasons:
ALL ROOF COVERINGS TO BE CLASS "A" OR BETTER
1, as owner of the property, or my employees with wages as their sole compensation,
will do the work, and the structure is not intended or offered for sale (See.7044,
Business & Professions Code)
I, as owner of the property, am exclusively contracting with licensed contractors to
HAZARDOUS MATERIALS DISCLOSURE
construct the project (Sec.7044, Business & Professions Code).
I have read the hazardous materials requirements under Chapter 6.95 of the
California Health & Safety Code, Sections 25505, 25533, and 11134' 1 will
I hereby affirm under penalty of perjury one of the following three
maintain compliance with the Cupertino Municipal Code, Chapter 9.12 and the
declarations:
Health & Safety Code, Section 25532(a) should I store or handle hazardous
I have and will maintain a Certificate of Consent to self - insure for Worker's
material. Additionally, should 1 use equipment or devices which emit hazardous
Compensation, as provided for by Section 3700 of the Labor Code, for the
air contaminants as defined by the Bay Area Air Quality Management District I
performance of the work for which this permit is issued.
will maintain compliance with the Cupertino M mcipal Code, Chapter 9.12 and
I have and will maintain Worker's Compensation Insurance, as provided for by
the Health & Safety Code, Se ns 25505, 2 5 3 and 25534.
Section 3700 of the Labor Code, for the performance of the work for which this
Owner or authorized agent: Date: Ib i4
permit is issued.
1 certify that in the performance of the work for which this permit is issued, I shall
not employ any person in any manner so as to become subject to the Worker's
Compensation laws of California. If, after making this certificate of exemption, l
CONSTRUCTION LENDING AGENCY
become subject to the Worker's Compensation provisions of the Labor Code, I must
I hereby affirm that there is a construction lending agency for the performance of
forthwith comply with such provisions or this permit shall be deemed revoked.
work's for which this permit is issued (Sec. 3097, Civ C.)
Lender's Name
APPLICANT CERTIFICATION
Lender's Address
I certify that I have read this application and state that the above information is
correct. I agree to comply with all city and county ordinances and state laws relating
to building construction, and hereby authorize representatives of this city to enter
upon the above mentioned property for inspection purposes. (We) agree to save
indemnify and keep harmless the City of Cupertino against liabilities, judgments,
ARCHITECT'S DECLARATION
costs, and expenses which may accrue against said City in consequence of the
I understand my plans Shall be used as public records.
granting of this permit. Additionally, the applicant understands and will comply
with all non -point source regulations per the Cupertino Municipal Code, Section
Licensed Professional
9.18.
Signature Date
COMMUNITY DEVELOPMENT DEPARTMENT o BUILDING DIVISION
10300 TORRE AVENUE o CUPERTINO, CA 95014 -3255
(408) 777 -3228 o FAX (408) 777 -3333 ^ buildingQcupertino.orp
e 0 V
NEW CONSTRUCTION F-1 ADDITION ❑ ALTERATION/T1 ❑ REVISION/ DEFERRED ORIGINAL PERMIT #
PROJECT ADDRESS /) I Q zo o AkV��� t qN�E , Cu etf f uo
LK,.
APN 4
/' [>51
OWNER NAME C 4 cs (' S 1 0 Ci
PHONE Ji o e� q 3 �I
/ �,
jZIPQ/
E -MAll, - f:5a'%.i J 2.7 rn,��Q ! • �A
l
STREET ADDRESS 21 SZo � � 1 � � L � L
CITY, STATE, �P B r �f r IN O ^/t fl-
<�� CE•MAJL���
FAX
CONTACT NAME ^',.p
PHO al.� ��yY
/t
J
STREET ADDRESS /C��q/IL � p p ,`
CITY, STAT iP ��� F0 13
❑ OWNER ❑ OWNER- BUILDER XOWNERAGENT CONTRACTOR ❑ CONTRACTOR AGENT ❑ ARCHITECT ❑ ENGINEER ❑ DEVELOPER ❑ TENANT
CONTRACTOR NAME
LICENSE NUMBER
LICENSE TYPE
BUS. LIC #
COMPANY NAME
E -MAIL
FAX
STREET ADDRESS
CITY, STATE, ZIP
PHONE
LICENSE NUMBER
BUS. LTC k
COMP��Ajr�pq NAME
E -MAIL /� n id /� 8 g1 G �oA
FAX
e
SRGJ;DI SS ^'
Cl1Y,STA
DESCRIPTION OF WORK
Vnren
�✓� �� �� of y e lb u
EXISTING USE
R1j
PRO ED qUS CONSTR.
R`27
V P?
N STORIES
USE
TYPE
SQ.FT..II
VALUATION (S)
AREA I�I�
AREA Q �rG 7
Q
AREA (/�
/i
TOTAL
NET AREA �'�
V 5
{OCC.
f"-�>
REMODEOL AREA
MODEL AREA
REMODEL AREA 2 *7 0
PORCH AREA
DECK AREA
TOTAL DEE�CKIPORCH AREA
GARAGE AREA: DETACH
2� V
it
G
ATTACH
# DWELLING UNITS:
IS A SECOND UNIT E] YES
SECOND STORY []YES
BBEING
ADDED? ONO
ADDITION? IffNO
PRE - APPLICATION ❑ YES IF YES, PROVIDE COPY OF
PLANNING APPL N PLANNING APPROVAL LETTER
IS THE BLDG AN YES
EICHLER NOME? ONO
RECEIVED BY:
TOTAL V/�LUA.
�10
/( G
By my signature below, I certify to each of the following: I am the property owner or authorized agent to act a pr erty owner's behalf. I have read this
application and the information I have provided is correct- I have read the Description of Work and verify te. I agree to comply with all applicable local
ordinances and state laws relating to building construction. I auth representatives of Cupertino to enter the above- identified property for inspection purposes.
Signature of Applicant/Agent: Date: ��� T , Zol y
SUPPLEMENTAL INFORMA O'NR_EWtWD
PLAN CHECK TYPE
ROUTING SLIP
C1 OVER-THE-COUNTER
UILDING PLAN REVIEW
_ New SFD or Multifamily dwellings: Apply for demolition permit for
existing building(s). Demolition permit is required prior to issuance of building
permit for new building.
❑ EXPRESS
NNING PLAN REVIEW
_ Commercial Bldgs: Provide a completed Hazardous Materials Disclosure
TANDARD
UBLIC WORKS
Form if any Hazardous Materials are being used as part of this project.
❑ LARGE
DEPT
_ Copy of Planning Approval Letter or Meeting with Planning prior to
❑ MAJOR
SANITARY SEWER DISTRICT
submittal of Building Permit application.
❑ ENVIRONMENTAL HEALTH
BldgApp_2011.doc revised 06121111
�,�,�������, CITY OF CUPER'TINO
I( "I FEE ES'TIMA'TOR — BUILDING DIVISION
OCCUPANCY TYPE:
ADDRESS: 21820 Oakview Lane
DATE: 0111612014
REVIEWED BY: Sean
PC FEE ID
APN:
BP #:
`VALUATION:
$160,000
*PERMIT TYPE: Building Permit
PLAN CHECK T PE: Addition
PRIMARY SFD or Duplex
USE:
2nd Unit? 0 Yes No
.
OTC. 0 Yes (F)No
PENTAMATION 1 R3SFDADD
PERMIT TYPE:
WORK
Construct 847 sq ft of one story additions; kitchen remodel 108 sq ft • bathroom remodel 130 sq ft);
SCOPE
other interior remodel (270 sq ft).
OCCUPANCY TYPE:
TYPE OF
CONSTR.
FLR AREA
s.f.
PC FEES
PC FEE ID
BP FEES
BP FEE ID
R -3 (Custom)
II- B,111- B,IV,V -B
847
$2,577.00
IR3PLNCK
$1,617.00
IR3INSP
i.:it'C. iirFj.%. .t'f'.2 -..
$0.00
F-1087 s.£
$626.00
Remodel, Kitchen (< =300 sf)
IREMRESKIT
Permit Fee:
$1,617.00
Suppl. Insp. Fee-0 Reg. COT
0 0
hrs
$0.00
F-2-707 s.f. Remodel, Other
$418.00 IREMRESOTH
PME Unit Fee:
$0.00
PME Permit Fee:
$0.00
C"(insft°dP,.tio"! .1 Br
TOTALS:
847
$2,577.00
]Jniini'st uTive Fee:
$1,617.00
MECH, HOURLY Yes No
PLUMB, HOURLY () Yes ,a Q No.
ELEC, HOURLY �5 0 Yes , Q) Nod
vF`ec;':. PlY?n, {;?;:ec:A
Piwi?b. Pion C:'',r�r.:d..
t> e... 1" zi r" C';;ecn
Akch. P..,nnil l-`ee:
Pttirnr.. Pef ' itft l'ce.
! >'; ;
Oche" +.18( a. in",
Ll
0,0
: b.fBCF1, ?y1.c,Yl, t'c'<;':
1'/PM0..l7 %5�1. .. 'CC:
i.:it'C. iirFj.%. .t'f'.2 -..
NOTE: This estimate does not include fees due to other Departments (Le. Planning, Public Works, Fire, Sanitary Sewer District, School
District, etc.). These fees are based on the preliminary information available and are onlv an estimate. Contact the Dept for addn'l info.
]FEE ITEMS (Fee Resolution 11 -053 Eff 711113)
FEE
QTY/FEE
MISC ITEMS
Plan Check Fee:
$2,577.00
130 s.f.
$626.00
Remodel, Bath (< =300 sf)
IREMRESBAT
Suppl. PC Fee: (2) Reg. 0 OT
0,0
hrs
$0.00
PME Plan Check:
$0.00
F-1087 s.£
$626.00
Remodel, Kitchen (< =300 sf)
IREMRESKIT
Permit Fee:
$1,617.00
Suppl. Insp. Fee-0 Reg. COT
0 0
hrs
$0.00
F-2-707 s.f. Remodel, Other
$418.00 IREMRESOTH
PME Unit Fee:
$0.00
PME Permit Fee:
$0.00
C"(insft°dP,.tio"! .1 Br
]Jniini'st uTive Fee:
0
0
Work Without Pen-nit? 0 Yes (D No
$0.00
Advanced Planning Fee: IPLLONGR
$118.58
Select a Non - Residential
Building or Structure
E)
0
:I; �n eI Dcicr�mF;)atr)tic>n .I �,
Strong Motion Fee: IBSEISMICR
$16.00
Select an Administrative Item
Bldg Stds Commission Fee: IBCBSC
$7.00
SUBTOTALS:
$4,335.581$1,670.00
TOTALYEE:
1 $6,005.58
Revised: 01115/2014
���
SST I p s0
CUF'[ =FtT INn
CONTRACTOR / SUBCONTRACTOR LEST
B uiilaluung Department
City Of Cupertino
10300 Torre Avenue
Cupertino, CA 95014 -3255
Telephone: 408 - 777 -3228
Fax: 408 - 777 -3333
JOB ADDRESS: ` 2® V L,,U
PERMIT # i4Q 100611
OWNER'S NAME: C PM
PHONE # °—`
GENERAL CONTRACTOR: P lG ®
BUSINESS LICENSE #
ADDRESS: / UKIWIM IA)
CITY /ZIPCODE: '527'
Cam,'
*Our municipal code requires all businesses working in the city to have a City of Cuperti'do business license.
NO BUILDING FINAL OR ]FINAL OCCUPANCY INSPECTION(S) WILL BE SCHEDULED UNTIL THE
GENERAL CONTRACTOR AND ALL SUBCONTRACTORS HAVE OBTAINED A CITE' OF CUP1ERTRNO
BUSINESS LICENSE.
I am not using any subcontractors:
Signature
Please check applicable subcontractors and complete the ff®illo wing information:
Date
V
SUBCONTRACTOR
BUSINESS NAME
BUSINESS LICENSE #
Cabinets & Millwork
Cement Finishing
Electrical
Excavation
Fencing
Flooring / Carpeting
Linoleum / Wood
Glass / Glazing
Heating
Insulation
Landscaping
Lathing
Masonry
Painting / Wallpaper
Paving
Plastering
Plumbing
Roofing
Septic Tank
Sheet Metal
Sheet Rock
Tile
Owner / Contract& Signature Dale
Apr 20 15 05:21 p Richard Haro Drafting 14082388113 p.1
CUPERTINO
PU"()SE
UTILITY RELEASE REQUEST FORM
ComMUlrlTY DEVELOPMENT DEPARTMENT • BUILMNG DIVISION
ALBERT SALVADOR, F.E., C.B.D., BUILDNG OFFICIAL
10300 TCRRE AVENUE - CUPERTINO, CA 95014 -3255
(408) 777 -3228 - FAX (408) 777 -3333 - bu0dino @cuaert'no.orcl
For residential single family or duplex construction, there are cases where gas and electric utilities are
requested to be released prior to the. issuance of the,certificate of occupancy. Upon approval from the
building inspector, the City of Cupertino is allowing both utilities to be released prior to the final sign -off of
the building.
INSTRUCTIONS,
1. Dmvnload this form at: httt):iJ~vtivw.cu ertino.ora /index.as x? aiie-297.
2. Complete the form and obtain signatures from both the oNvner of the property and the primary contractor.
3. Fax, E -Mail, Mail or hand deliver the original signed form to:
City of Cupertino
Building Division
Attn: Utility Release Request Fort;/ 408- 777 -3228 office
10300 Torre Ave. 408- 777 -3333 fax
Cupertino, CA 95014 buildingrQcupertino.or
4. Schedule a Gas Meter Release inspection (4. 03) and/or Electric Meter Release inspection (4404). Please
note, a Gas Test inspection (0506) is required prior to or at the same time of the Gas Meter Release
inspection.
BUILDING INFORit7A.TION (Please complete the following information):
APN BLDG PERMIT
� DATE: 04 -17 -20152
326 --10 -114 I
zoo
SITE 21820 QakviOW ,Lane, Cupertino,
CA 95014
ADDRESS:
OWNER'S NAME, Christopher Tsang
PHONE
FAX
408- 431 -5172
MAILING ADDRESS (ii d `event tram site address):
'
GONTRACTO
PH. ONE ;r
CM2=)C__'h
PHONE r :
1 FAX #':
f�
.av-
I request the City to releasa my utilities prior to obtein'sng a final ins pecticn approval for the building. I ful'y understand the occupants of
the building carrot move ini a residence un.0 they receive all of the required final sign -efts and the City has issued a Certificate of
occupant for t.,e ild' .
Owner Prim:,...,, Christopher Tsang ate. -
[Date 17 -2D15
� ... :. -,�
: �.' �.Contractor, ...... ........ ......... Pnnt:..,�l CF`, . .�� Date ,. r
45.._....
LfiilitvRcleaseFarm 20) 1,dae revised 0810911I
May 11 15 05:02p
CLOPIERTGNO
Richard Haro Drafting
14082388113 p.1
CONTRACTOR / SUBCONTRACTOR LEST
Building Department
City Of Cupertino
10300 Torre Avenue
Cupertino, CA 95014 -3255
Telephone: 408 -777 -3228
Fax: 408- 777 -3333
JOB ADDRESS:' : ` ' `) --
PERMIT # f
OWNER'S NAME;,` _ -
PHONE #f
GENERAL CONTRACTOR: ! `
BUSINESS LICENSE �
el
ADDRESS: ' :! : a':. �1 1,,.' . _.
CITY /ZIPCODE:
*Our municipal code requires a01 businesses working! the city to have a City of Cupertino business license.
NO BUILDING ]FVNAL OR FILIAL OCCU?ANCY INSPEC ON(S) WILL BE SCHEDULED UNTIL THE
GENERAL CONTRACTOR AND SU]BCONI'1 RACTOR HAVE OBTAINED !>, CITY Off' CU?ER')� INO
BUSINESS LICENSE.
I am not using any subcontractors: - S` It b ��
SiQna Date
Please check applicable subcontractors and complete the folllWng information:
V
SUBCONTRACTOR
BUSINESS NAME
B US1NESS LICENSE #
Cabinets & Millwork
Cement Finishing
Electrical
Excavation
Fencing
Flooring / Carpeting
Linoleum / Wood
Glass / Glazing
Heating
Insulation
Landscaping
Lathing
Masonry
Painting / Wallpaper
Paving
Plastering
Plumbing
Roofing
Septic Tank
Sheet Metal
Sheet Rock
Tile
Owner / Contractor Signature Dal
r3
JAN Il 204
QOOMON TO -g:
TSANG G°EMBEMC E
21828 0AKW LAW LANE
cuP1E 37Moq - cQ 93016
cUPER INN
Building DePate "q
c� OP
,�EViEWEG FUt�
(,ODE i3OMPLIANCE
" �'w
Revievved By'
•�
CE
TI LE 24 E E'GY EST
FRI ENERGY CONSULTANTS, L LCD
TITLE 24 ENERGY CONSUL 17ANTS
21 Me HARRISON AVE.
CGQfi�iv P o C LL9 CA. 96008
408-866-1620
FAK: 408 - 866 -6832
EMAIL: onfo@fir6consukng.com
BULOUG ENERGY AHALMS REPORT
PROJECT:
Tsang Residence
21820 Oakview Lane
Cupertino, CA95014
Project Designer:
Richard Haro Drafting & Planning, Inc.
2150 Mangin Way
San Jose, CA 95148
408 - 532 -1755
Repon Prepared by:
Deborah San Luis 808-12 -2133
FRI Energy Consultants, LLC
21 N. Harrison Ave. Suite 210
Campbell, CA 95008
408 -866 -1620
Job Number:
01 30643
Date
11/8/2013
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report This program has approval and is
authorized by the Cali fomia. Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
Energ�rPro 5.1 by Emery Soft User Number: 1315 RunCode: 2013- 11- 08T09.37.41 ID: 0130643
EQUIPMENT LIST AND INSULATION PLACEMENT NOTE
ADDITION FOR #0130643
TSANG RESIDENCE
21820 OAKVIEW LANE
CUPERTINO, CA 95014
NOTE: MINIMUM HEATING AND COOLING LOAD CALCULATIONS ARE GENERATED BY THE
COMPUTER PROGRAM. THERE ARE OTHER DESIGN FACTORS THAT MUST BE CONSIDERED,
DUCT FLOW, COIL SIZING, OVERSIZING SAFETY MARGIN, ETC. IT IS THE
RESPONSIBILITY OF THE MECHANICAL CONTRACTOR OR WHOEVER DESIGNS AND INSTALLS
THE HEATING AND COOLING SYSTEM TO MAKE THE FINAL DECISION ABOUT THE SIZE OF
THE EQUIPMENT TO BE INSTALLED.
THE HVAC EQUIPMENT USED MUST MEET THE EFFICIENCIES SHOWN IN THE TITLE 24
CALCULATIONS. THESE ARE AS FOLLOWS:
HEATING: USING EXISTING FURNACE.
AIR CONDITIONING: N /A.
SETBACK THERMOSTAT: EXISTING THERMOSTAT TO REMAIN.
WHOLE HOUSE VENTILATION REQUIREMENTS: 2008 CEC RESIDENTIAL STANDARDS
VENTILATION FOR THIS PROJECT NOT REQUIRED PER RULE SEC. 4.6 EXEPTION 5 TO
SECTION 152 (a) .
HOT WATER HEATER: USING EXISTING WATER HEATER.
FAUCETS AND SHOWERHEADS: SHOWERHEADS AND FAUCETS MUST BE ON
THE CEC APPROVAL LISTING IN ORDER TO BE INSTALLED. THIS CAN BE CHECKED
THROUGH THE BUILDING DEPARTMENT ISSUING THE BUILDING PERMIT, THE CALIFORNIA
ENERGY COMMISSION 916 - 654 -4080, OR BY CALLING OUR OFFICE 408 - 866 -1620.
INSULATION PLACEMENT:
INSULATION TO BE INSTALLED MUST MEET CEC QUALITY STANDARDS.
FOR GLAZING U- FACTORS AND SHGC VALUES REFER TO THE CF -1R
OF THE 0
NOTE: ALL R- VALUES AND U- VALUES LISTED ARE MINIMUM VALUES AND CAN
BE EXCEEDED.
LIGHTING:
PERMANENTLY INSTALLED LUMINARIES LOCATED IN BATHROOMS, GARAGES, LAUNDRY
ROOMS, AND UTILITY ROOMS SHALL BE HIGH EFFICACY LUMINARIES OR LOW EFFICACY
CONTROLLED BY A MANUAL ON AUTOMATIC OFF OCCUPANT SENSOR(S) CERTIFIED TO
COMPLY WITH SECTION 119(D)
PERMANENTLY INSTALLED LUMINARIES LOCATED IN ROOMS OTHER THAN IN KITCHENS
BATHROOMS, GARAGES, LAUNDRY ROOMS. AND UTILITY ROOMS SHALL BE HIGH EFFICACY
LUMINARIES (EXCEPT CLOSETS LESS THAN 70 FT) OR LOW EFFICACY BULBS
CONTROLLED BY A DIMMER SWITCH OR BY AN MANUAL ON AUTOMATIC OFF OCCUPANT
SENSOR THAT COMPLIES WITH SECTION 119(d).
HIGH EFFICACY LUMINARIES OTHER THAN OUTDOOR HID: CONTAIN ONLY HIGH EFFICACY
LAMPS AS OUTLINED IN TABLE 150 -C AND DO NOT CONTAIN A MEDIUM SCREW BASE
SOCKET (E24/E26). BALLAST FOR LAMPS 13 WATTS OR GREATER ARE ELECTRONIC AND
HAVE AN OUTPUT FREQUENCY NO LESS THAN 20 kHz
LUMINARIES THAT ARE RECESSED INTO INSULATED CEILINGS MUST BE APPROVED FOR
ZERO CLEARANCE INSULATION COVER (IC) AND ARE CERTIFIED TO ASTM E283 AND
LABELED AS AIR TIGHT (AT) TO LESS THAN 2.0 CFM AT 75 PASCALS
Lamp Power hating for Non -LED Lighting
Minimum Lamp Efficacy for Non -LED
(see Note 1), or System Power hating for LED
Lighting, or Minimum System Efficacy for
Lighting see Notes 2, 3, and 4
LED Lighting
5 watts or less
30 lumens per watt
over 5 watts to 15 watts
40 lumens per watt
over 15 watts to 40 watts
50 lumens per watt
over 40 watts
60 lumens per watt
Notes:
1- Determine minimum lamp efficacy category for lighting systems which are not LED using the
initial rated lumens divided by the rated watts of the lamp (not including the ballast).
2. To qualify as high efficacy, an LED luminaire shall meet the minimum system efficacy
requirements in Table 150 -C when determined according to Reference Joint Appendix JA8,
and be certified to comply with Section 119(m), and input power shall be determined
according to Section 130(d)5.
3. For a Hybrid LED Luminaire to qualify as a high efficacy luminaire, all lighting systems in the
luminaire shall qualify as high efficacy according to Section 150(k)1, and the LED Light
Engine with Integral Heat Sink shall comply with Note 4, below.
4. To qualify as high efficacy, an LED Light Engine with Integral Heat Sink shall meet the
minimum system efficacy requirements in Table 150 -C when determined according to
Reference Joint Appendix JA8, shall be certified to comply with Section 119(m), and input
power shall be determined according to Section 130(d)5.
WHEN IN DOUBT ABOUT MEETING THIS REQUIREMENT CALL
FRI ENERGY CONSULTANTS, 408 - 866 -1620.
ALL FLUORESCENT BALLAST MUST BE APPROVED BY THE CEC, THIS CAN BE CHECKED
THROUGH THE BUILDING DEPARTMENT ISSUING THE BUILDING PERMIT, THE CALIFORNIA
ENERGY COMMISSION 916 - 324 -3376, OR BY CALLING OUR OFFICE
408 - 866 -1620.
ALL REFRIGERATORS, REFRIGERATOR - FREEZERS AND FREEZERS MUST BE ON THE CEC
APPROVAL LIST THIS CAN BE CHECKED THROUGH THE BUILDING DEPARTMENT ISSUING
THE BUILDING PERMIT, THE CALIFORNIA ENERGY COMMISSION 916 - 324 -3376, OR BY
CALLING OUR OFFICE 408- 866 -1620.
13. SKYLIGIff
6, TYP. WALL/ AT11C
10 6L11LT IMP Wcrr
12.
11. CANALEVEP M.
LIVINU 5f ACS
1.1Yf'. FLAT CEILING
14, puef
A'nC SPACE 1 2. VAULT POOP W/ A'�IC '5, VAMP WOV
LIVING SPACE
8. U. A30VE C Aa
5, GAP.AGE 5EPA MON WALL
�. CPAWL SPACE -
TYPICAL
4. M WALL
J 9, SLAP
IN511MON
ADDITION FOR #0130643
TSANG RESIDENCE
21820 OA1KVIET9 LANE
CUPERTINO, CA 95014
THESE ARE MINIMUM INSULATION LEVELS FOR THE ADDITION /ALTERATION ONLY.
APPLIC. R- VALUE. INSUL. TYPE
1.
TYPICAL FLAT CEILING
TYP
R -30
INSULATION, BATT
OR
RIGID
2.
VAULTED ROOF W /ATTIC
N/A
INSULATION, BATT
OR
RIGID
3.
VAULTED ROOF NO ATTIC
TYP
R -19
INSULATION, BATT
OR
RIGID
4.
EXTERIOR STALL
TYP
R -13
INSULATION, BATT
OR
RIGID
S.
SEPARATION WALL
N/A
INSULATION, BATT
OR
RIGID
6.
WALL BACKING INTO ATTIC
N/A
INSULATION, BATT
OR
RIGID
i.
CRAWL SPACE FLOOR
TYP
R -19
INSULATION, BATT
OR
RIGID
0.
FLOOR ABOVE GARAGE
N/A
INSULATION, BATT
OR
RIGID
9.
SLAB EDGE INSULATION'
TYP
SEE NOTE BELOW
10.
BUILT UP ROOF
N/A
11.
CANTILEVERED FLOOR
N/A
INSULATION, BATT
OR
RIGID
U -VALUE
SHGC
12.
GLAZING TYP
0.58
0.65
DOUBLE NON -METAL OR
BETTER
FRENCH DOORS TYP
0.53
0.65
DOUBLE NON -METAL OR BETTER
SLIDING GLASS DOORS TYP
0.53
0.65
DOUBLE NON -METAL OR
BETTER
13.
SKYLIGHTS TYP
1.30
0.60
DOUBLE NON- METAL,OR BETTER
14.
HEATING & COOLING DUCTS
MINIMUM
INSL.
R -VALUE 4.2
1 THE KININUM DEPTH OF CONCRETE -SLAB FLOOR PER11WTER INSULATION SHALL BE 16 INCHES OR
THE DEPTH OF THE FOOTING OF THE BUILDING, WHICHNVER IS LESS.
NOTE: THIS CROSS SECTION IS USED ONLY FOR DIAGRAMMATIC
PURPOSES AND IS NOT A TRUE CROSS SECTION OF THIS PROJECT.
TA o LIE OF CONTENTS II
Cover Page
Table of Contents
Form CF -'i R Certificate of Compliance
Form MF -1 R Mandatory Measures Summary
HVAC System Heating and Cooling Loads Summary
Energy Pro 5.1 by
Job Number: ID: 0130643
User Number: 1315
2
3
10
13
PERFORMANCE CFRTFICATE: Residential (Part 1 of 5)
CF -1 R
Project Name
Tsang Residence
Building Type ® Single Family ❑ Addition Alone
❑ Mufti Family 10 Existing+ Addition /Afteration
Date
111812013
Project Address
21820 Oakview Lane Cuoergho
California Energy Climate Zone
CA Climate Zone 04
=2,381 ond. Roor Area
Addition
825
# of Stories
1
HELD NSPEC` MN ENERGY CHECKUST
❑ Yes IZ] No HERS Measures --If Yes, A CF -413 must be provided per Part 2 of 5 of this form.
❑ Yes ®ivo Special Features --If Yes, see Part 2 of 5 of this form for details.
NSULATIOM
ConsW action Type
Area Special
Cavit Features see Part 2 of 5 Status
Floor Wood Framed wrJCrawl Space None 1,556 Existing
wall Wood Framed None 664 Existing
Roof Wood Framed Attic R -19 1,550 Existing
wall Wood Framed R -13 973 New
Floor Wood Framed wlCrawl Space R -19 659 New
Roof Wood Framed Attic R -30 574 NOW
Roof Wood Framed Ratter R -19 Z45 New
Slab Unheated Slab on -Grade None 166 Perim = 8' New
FEMESTRATlON U_ Exterior
Orientation Area(fff Factor SHGC Overhang Sidefjns Shades Status
Front (W) 64.3 1.280
0.80 none crone Bug Screen Removed
Front (W) 72.0 0.580
0.65 none none Bug Screen New
Left (ill) 40.0 1.250
0.80 crone none Bug Screen Removed
Left (Af) 54.0 0.580
0.65 none none Bug Screen New
Rear (E) 58.3 1.280
0.80 none none Bug Screen Removed
Rear (Ej 73.5 0.580
0.65 none none Bug Screen New
Rear (Ej 80.0 0.530
0.65 crone none Bug Screen New
Right (S) 7.3 1.280
0.80 none none Bug Screen Removed
Right (S) 39.3 0.580
0.65 none none Bug Screen New
Skylight 5.6 1.300
0.60 none none None New
Left (AQ 7.3 1.280
0.80 none none Bug Screen Removed
HVAC SYSTEMS
Qty. H eatin Min. EN
CooNg Min. Ef$ Thermostat Status
1 Central Furnace 78% AFUE
Split Air Conditioner 13.0 SEER Setback Existing
HVAC DISTROUY10M
Location HeaUnq
Duct
Cooling ®acct (Location R -Value Status
HVAC System Ducted
Ducted Attic, Ceiling Ins, rented 42 Existing
WATER HEATING
Qt V. e Gallons Min. Efff ®isWbution Status
Ever Pro 5.1 )y Ener ySott User Number: 1315
RunCode: 2013 -11 -087199:37:41 ID: 0130643
Page 3 of 13
PERFORMANCE CERTIFICATE: Residential (Part 1 of 5)
CF -1 R
Project Name
Tsang Residence
Building Type ® Single Family ❑ Addition Atone
❑ Mufti Family ® Existing+ Addit "ton /Aheration
Date
111812013
Project Address
21820 Oakview Lane Cuperlsino
California Energy Climate Zone
CA Climate Zone 04
Total Cond. Floor Area
2,381
Addition
825
ii of Stories
1
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes ®No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes I] No Special Features --If Yes; see Part 2 of 5 of this form for details_
INSULATION Area Special
Construction Type Cavity f Features see Part 2 of 5) Status
FENESTRATION U_ Exterior
Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status
Rear (E) 40.0 1.250 0.80 none none Bug Screen Removed
Front (VIII, 20.0 0.530 0.65 none none Bug Screen New
Right (S) 56.7 0.530 0.65 none none Bug Screen New
Skylight 5.8 1.300 0.60 none none None New
HVAC SYSTEMS
Qty. Heating Mina. Eff Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION Duct
Location Heating Cooling Duct Location R -Value Status
WATER BEATING
Q! y. Type Gallons Min. Eff Distribution Status
Ener Pro 5.1 b Enen Sail User Number: 1315 RunCode: 2093- 17- 08T09 :3T:41 ID: 0130643
Page 4 of i 3
PERFORMANCE CC RTWiCATE: ResWeMW (Part 2 of 5) CF -1 R
Project Name
Tsang Residence
Building Type 0 Single Family 0 Addition Alone
0 Multi Family ® Existing+ Addition/Atteration
Date
11/&2013
SPEUQL FEATURES IINSPEC110M CHECKLIIST
The enforcement agency should pay special attention to the items specified in this checklist. These items require special written
justification and documentation, and special verification to be used with the performance approach. The enforcement agency
determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of
the special justification and documentation submitted.
HERS REQUIRED VERT[C A IION
Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a
completed CF -4R form for each of the measures listed below for final to be given.
E Pro 5. i b Eyre Soft User Number: 1315 Rui70ode. 2013- 11- WT09:37.41 1D: 0130643 Page 5 of 13
PERFORMANCE CERTMCATEo ReaWefflW (Part 3 of 5) CF -1 R
Project Name
Building Type ® Single Family. 0 Addition Alone
Date
Tsang Residence
O Multi Family 12 Existing+ Addition /Alieralion
111&2013
ANNUAL ENERGY USE SUMMARY
Standard Proposed Margin
TDV 'k9tu /ft? r
Space Heating 61.70 42.19 19.51
Space Cooling 31.91 30.15 1.76
Fans 14.98 12.63 2.35
Domestic Hot Water 16.96 16.96 0.00
Pumps 0.00 0.00 0.00
Totals 125.55 101.94 23.61
Percent Better Than Standard: 18.8
[BUDLONM6 6O PL NEE o NO HERS VERIFICATION REQUIRED
Fenestration
Building Front Orientation: ltM 270 deg Ext. Walls/Roof Wall Area Area
Number of Dwelling Units: 1:00 (vv) 344 92
Fuel Available at Site: Natural Gas (N! 560 54
Raised Floor Area: 2.215 tsi 512 154
Slab on Grade Area: 166 (S) 616 96
Average Ceiling Height: s_o Root 2,361 12
Fenestration Average U- Factor: 0.56 TOTAL: 407
Average SHGC: 0.65 Fenestration /CFA Ratio: 17.1 %
REMARKS
STATEMENT OF COMPLIANCE
This certificate of compliance lists the building features and specifications needed
to comply with Title 24, Parts 1 the .Administrative Regulations,and Part 6_the
Eff iciency Standards of the California Code cf Regulations.
The documentation author hereby certifies that the documentation is accurate and complete.
DocumrDentafuon Author
Company FRI Energy Consultants. LL
!,
frJ73
Address 21 N. H8nlson Ave. Suite 210 Name Deborah San,Luis R08 -12 -2133
City/State/75P City/State/75P Campbell, CA 95008 Phone 408 - 866 -1620 Signed _ Date
The individual with overall design responsibility hereby certifies that the proposed building design represented in this set
of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and
with any other calculations submitted with this permit application, and recognizes that compliance using duct design,
duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require
installer testing and certification and field verification by an approved HERS rater.
Desugn P or Obunev (per Business & Professions Code)
Company Richard /daro Drafling & Planning, Inc.
Address 2150 Mangin Way Name Richard Haro
City /State.Zp San Jose, CA 95148 Phone 408-532-1755 Signed Licens Date
EnemyPro.5.1 by En Soft User Number. 1315 RunCode: 2013 -1 1- 0 8 70 9;37:41 ID: 0130643 Page 6 of 13
CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R
Project Name
Tsang Residence
Building Type ® Single Family O Addition Alone
❑ Multi Family 13 Existing+ Addition/Alteration
Date
1111812013
OPAQUE SURFACE
DETAILS
Surface
Type
Area
U-
Factor
Insulation
Azm
Tilt
Status
Joint Appendix
4
Location /Comments
Cavity
Exterior
Frame
Interior
Frame
Floor
1,556
0.097
None
0 180
Existing
4.4.1 -A1
1ST Floor
Wall
128
0.356
None
270
90
Existing
4.3.1 -Ai
1ST Floor
Wail
280
0.356
Norte
0 90
Existing
4.3.1 -A1
1ST.F46or
Wall
80
0.356
None
90
90
Existing
4.3.1 -A1
1ST Floor
Wall
176
0.356
None
1801
90
Existing
43.1 -A1
1ST Floor
Door
17
0.500
None
1601
90
1 Removec
4.5.1 -A4
1ST Floor
Door
20
0.500
None
180
90
1 Removec
4.5.1 -A4
1ST Floor
Roof
1,550
0.048
R -19
1
180
18
Existin
4.2.1 -A16
1ST Floor
Wall
147
0.356
None
270
90
Rernom
4.3.1 -Ai
1ST Floor
Door
20
0.500
None
270
90
Remov
4.5.1 -A4
1ST Floor
Wall
65
0.356
None
0 90
Removet
4.3.1 -Ai
1ST Floor
Wall
276
0.356
None
90
90
Remover
4.3.1 -Ai
1ST Floor
Door
13
0.500
None
90
90
Remov
4.5.1 -A4
1ST Floor
Wall
193
0.102
R -13
160
90
New
4.3.1 -A3
1ST Floor
Floor
659
0.037
R -19
0 180
New
4.4.1 -A4
1ST Floor Addition
Wall
124
0.102
R -13
270
90
1 New
4.3.1 -A3
1 ST .Floor Addition
FENESTRATION
SURFACE
DETAILS
ID
Type
Area
U- Factor
SHGC
Azm
Status
Glazing Type
Location /Comments
1
Window
42.9
1.280
Default
0.80
Default
270
Removed Single
Metal Clear
1 ST Floor
2
Window
48.0
0.580
Default
0.65
Default
270
New
ruble Non Metal Clear
1 ST.Floor
3
Window
40.0
1.250
Default
0.80
Default
0
Removed Single
Metal Clear Door
1ST Floor
4
Window
48.0
0.580
Default
0.65
Default
0
New Double
Non Metal Clear
1 ST Floor
5
Window
21.9
1.280
DelauR
0.80
Default
90
Removed Single
Metal Clear
1ST Floor
6
Window
40.0
0.580
Default
0.65
Default
90
New Double
Non Metal Clear
1 ST Floor
7
Window
40.0
0.530
Default
0.65
Default
90
New Double
Non Metal Clear Door
1 ST Floor
8
Window
7.3
1.280
Default
0.80
Default
180
Removed Single
Metal Clear
I S T Flow
9
Window
24.0
0.580
Default
0.65
Default
180
New Double
Non Metal Clear
1ST Floor
f0
Skylight
5.8
1.300
Default
0,60
Default
180
New Double
Metal Tinted Skylight
1ST.Floor
11
Window
21.4
1.280
Default
0.80
Default
270
Removed Single
Metal Clear
1 ST Floor
12
Window
7.3
1.280
Default
0.60
Default
0
Removed Single
Metal Clear
1ST.Floor
13
Window
36.4
1.280
Default
0.80
Default
90
Removed Single
Metal Clear
1ST Floor
14
Window
40.0
1.250
Defauft
0.60
Default
90
Removed Single
Metal Clear Door
1ST Floor
15
Window
7.3
0.580
Default
0.65
Default
180
New Double
Non Metal Clear
1ST Floor
16
Window
20.0
0.530
Default
0.65
Default
270
New Double
Non Metal Clear Door
1ST Floor Addition
(1) U- Factor Type: 116 -A = Default Table from Standards, NFRC = Labeled
2 SHGC T 116 -B = Default Table from Standards, NFRC = Labeled
Value
Value
EXTERIOR
SHADING DETAILS
ID
Exterior Shade Type
SHGC
Window
Overhang
Left Fin
Right Fin
Hqt
Wd
Len
H t
LExt
RExt
Dist
Len
N t
Dist
Len
H t
i
Bug Screen
0.76
2
Bug Screen
0.76
3
Bug Screen
0.76
4
Bug Screen
0.76
5
Bug Screen
0.76
6
Bug Screen
0.76
7
Bug Screen
0.76
8
Bug Screen
0.76
9
Bug Screen
0.76
10
None
1,00
11
Bug Screen
0.76
12
Bug Screen
0.76
13
Bug Screen
0.76
14
Bug Screen
0.76
15
Bug Screen
0.76
16
Bug Screen
0.76
Ener Pro 5.1 b y EnergySoft User Number: 1315 Runt ode: 2013- 11- 08T09.37.41 0:0130643 Page 7 of 13
CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R
Project Name
Tsang Residence
Building Type ® Single Family O Addition Alone
O Multi Family m Existing +AdditioniAfteration
Date
1111812013
OPAQUE SURFACE
DETAILS
Surface
Type
Area
U-
Factor
Insulation
Azm
Tilt
Status
Joint Appendix
4
Location /Comments
GavitylExtedof
Frame
Interior
Frame
Wall
226
0.102
R -13
0 90
New
4.3.1 -A3
iSTF,00rAddition
Wall
279
0.102
R -13
90
90
New
4.3.143
1STFloorAddition
Wall
151
0.102
R -13
180
90
New
4.3.1 -A3
1ST Poor Addifion
Roof
574
0.031
R -30
160
18
New
4.2.1 -A20
1 S T Floor Addition
Roof
245
0.051,R-19
180
18
New
4.22412
1ST Floor Addition
Slab
166
0.730
None
0 180
New
4.4.7 -A1
1ST Floor Addition
FENESTRATION
SURFACE
DETAILS
ID
Type
Area
U- Factor
SHGC`
Azm
Status
Glazing Type
Location/Comments
17
Window
24.0
0.580
Defauft
0.65
Default
270
New Double
Non Metal Clear
1ST Floor Addition
18
Window
6.0
0.580
Default
0.65
Default
0
New Double
Non Metal Clear
1 ST Floor Addition
19
Window
16.0
0.580
Default
0.65
Default
90
New Double
Non Metal Clear
1 ST Floor Addition
20
Window
17.5
0.580
Default
0.65
Default
90
New Double
Non Metal Clear
1 ST Floor Addition
21
Window
40.0
0.530
Defauft
0.65
Default
90
New Double
Non Metal Clear Door
f ST Floor Addition
22
Window
40.0
0.530
Default
0.65
Default
180
New Double
Non Metal Clear Door
1 ST Floor Addition
23
Window
8.0
0.580
Default
0.65
Default
180
New double
Non Metal Clear
1ST Floor Addition
24
Window
16.7
0.530
Default
0.65
Default
180
New Double
Non Metal Clear Door
1ST Floor Addition
25
Skylight
5.8
1.300
Default
0.60
Default
180
New Double
Aletal Tinted Skylight
1ST.FloorAddition
(1) U- Factor Type: 116 -A = Default Table from Standards, NFRC = Labeled Value
2) SHGC Type: 116 -B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type
SHGC
Window
Ove hang
Left Fin
Ri ht Fin
-Hq7tT
Wd
Len
Hgt
LExt
RExt
Dist
Len
Hgt
Dist
Len
H t
17
Bug Screen
0.76
18
Bug Screen
0.76
19
Bug Screen
0.76
20
lBug Screen
0.76
21
Bug Screen
0.76
22
Bug Screen
0.76
23
Bug Screen
0.76
24
Bug Screen
0.76
25
None
1.00
Ener Pro 5.1 b EnergySoff User Number: 1315 RunCode: 2013- 11- 06T09:37.•41 ID.-0130643 page =071
GER TBFBCATE OF COMP ANNE: Resodent!W (Part 5 of 5) CF -1 R
Project Name
Tsang Residence
Buildng Type ® Single Family ❑ Addition Alone
❑Mufti Family ❑Existing+ Addition /Alteration
Date
1111812013
BUILDING ZONE INFORMATIOM
System Name
Zone Name
Floor Area ft
Volume
Year Built
New
Existing
Altered
Removed
HVAC System 1ST
Roar
056
12,448
1955
1
S7 Floor Addition
825
6,600
ToWs 1
8251
1,556
0
0
HVAC SYSTEMS
stem Name
Qt .
eating e
Min.
oo inq T ype
Min. Eff.
Thermostat T yp e
Status
HVAC System
1
Central Furnace
76 %AFUE
Split Air Conditioner
13.0 SEER
Setback
Existing
HVAC DISTRIBUTION
System Name
Heating
Cooling—
Duct Location
Duct
R -Value
Ducts
Tested?
Status
HVAC System Ducted
Ducted
Attic, Ceiling Ins, vented
4.2
❑
Existing
WATER HEFTING SYSTEMS
S stem Name
oty.
Type
Distribution
Rated
Input
Btuh
Tank
Cap.
al
Energy
Factor
or RE
Standby
Loss -or
Pilot
Ext,
Tank
Insul. R-
Value
Status
Standard Gas 50 gal or Le
1
Sma11 Gas All
Pipes Ins
40,000
50
0.58
n/a
n/a
Existing
MULTI-FAMILY WATER
HEAVING
DETAILS
HYDRONIC
HEATING
SYSTEM
PIPING
Control
Hot Water Piping Length
ft
_�
0
o
Q — 1
System Name
Pipe
Length
Pipe
Diameter
Insul.
Thick.
Qt .
HP
Plenum
Outside
Buried
EnergyPro 5.1 by Energ Soft User Number: 1315 RunCode: 2013 -11- 08709:37:41 ID: 0130643 Page 9 of 13
MANDATORY MEASURES SUMMARY: Residential (Page 1 of 3 ) MF -1 R
Project Name
Tsang Residence
Date
1 111812013
NOTE: Low -rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF-
1 R -ALT Form) shall supersede the items marked with an asterisk (') below. This Mandatory Measures Summary shall be incorporated
into the permit documents, and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R
Form with Elans .
[quildinq Envelo a Measures:
§116(a )1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§116(a)4: Fenestration products (except field-fabricated windows) have a label listing the certified U- Factor, certified Solar Heat Gain
Coeff icient SHGC , and infiltration that meets the requirements of 10-111 (a).
117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed.
1 18(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -611 Form.
§1 18(i): The thermal emittance and solar reflectance values of the cool rooting material meets the requirements of §1-18(i) when the
installation of a Cool Roof is specified on the CF -1 R Form.
150 (a): Minimum R -19 insulation in wood -frame ceiling orequivalent U- factor.
150 : Loose fill insulation shall conform with manufacturer's installed design labeled R- Value_
'5150(c): Minimum R -13 insulation in wood -frame wall orequivalent U- factor.
1 50(d): Minimum R -13 insulation in raised wood -frame floor or equivalent U- factor.
1 50(f): Air retarding wrap is tested, labeled, and installed according to ASTM E1677 -95 (2000) when specified on the CF -1 R Form.
1 50(g): Mandatory Vapor barrier installed in Climate Zones 14 or 16.
§ 150(1): Water absorption rate for stab edge insulation material alone without facings is no greater than 0.30%; water vapor permeance
rate is no greater than 2.0 permAnch and shall be protected from physical dama a and UV light deterioration.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
4150 (6) 1 A. Masonry or factory-built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§ 150(e)1 B: Masonry or factory-built fireplaces have a combustion outside air intake, which is at least sbc square inches in area and is
equipped with a with a readily accessible, operable, and light-fitting damper and or a combustion -air control device.
§ 150(e)2: Continuous burning pilot lights and the use of indoor air for doling a firebox jacket, when that indoor air is vented to the
outside of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110 - §113. HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy
Commission.
§113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release
valve, backf low prevention, pump isolation valve, and recirculation loop connection requirements of §1 13(c)5.
§115: Continuously burning pilot lights are prohibited for natural gas: fan-type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu /hr are exempt), and pool and
spa heaters.
§1 50(h): Heating and /or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.
150(j): Heating systems are equipped with thermostats that meet the setback requirements of Section 112'c .
§1500)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped
with insulation having an installed thermal resistance of R -1 Zor greater.
§1500)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water- heating system, or other indirect hot water
tanks have R -12 external 'insulation or R -16 internal insulation where the internal insulation R -value is indicated on the exterior of the
tank.
§1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non - recirculating systems., and entire length of
recirculating sections of hot water pipes are insulated per Standards Table 15o =e.
§15(30)2-. Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot
water tank shall be insulated to Table 150 -8 and Equation 150 -A.
§150(j)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table
123 -A.
150 0)3A: Insulation is p rotected from damage, i ncluding that due to sun! ig ht, moisture, equipment maintenance, and wind.
§150(j)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in
conditioned space.
150(j)4: Solar water-heating systems and /or collectors are certified by the Solar Rating and Certification Co oration.
EnemLft 5.1 b Z EnergySoft User IVumber. 1315 RunCode. 2013-11- 08T09.37 :41 ID: 0130643 Page 10 of 13
MAND ATORY MEASURES SUMMARY: Residential (Page 2 of 3) MF -1 R
Project Name
Date
Tsang Residence
1111612013
§ 150(m)1: Ail air - distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections
601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-
4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct - closure system that meets the
applicable requirements of UL 181, UL 181 A, or UL 1818 or aerosol sealant that meets the requirements of UL 723_ If mastic or tape is
used to seal openings reater than 114 inch. the combination of mastic and either mesh or tape shall be used
§ 150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross - sectional area
of the ducts.
§150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150(m)7- Exhaust fans stems have back draft or automatic dampers.
§150(m)8: Gravity ventilating systems serving conditioned space have.either automatic or readily accessible, manually operated
dampers.
§ 150(m)9: insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause degradation of the material.
150(m)10: Flexible ducts cannot have porous inner cores.
§150(o): All dwelling units shall meet the requirements.of ANSUASHRAE Standard 62.2 -2007 Ventilation and Acceptable Indoor Air
Quality in Low -Rise Residential Bindings. Window operation is not a permissiible method of providing the Whole Building Ventilation
required in Section 4 of that Standard,
Pool and Spa Heating Systems and Equipment Measures:
§ 114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
Regulations; an on -off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and
shall not use electric resistance healing or a pilot ii ht.
§1 14(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction
and return lines, or built-up connections for future solar heating.
1 14 b 2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover.
§114(b)3: Pools.shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or
ro rammed to run only during off-peak electric demand periods.
150 : Residential pool systems ore u' ment meet the eump sizing, flow rate piping, filters, and valve requirements of §150(2).
Residential Lighting Measures:
§ 150(k)1: High efficacy luminaires. or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies
contained in Table 150 -C and is not a low efficacy luminaire as specified by 150(k )2.
§150(k)3: The wattage of perrnanent installed luminaires shall be.determined asspecified by 130 d .
§150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than
20 kHz.
§150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain
only high efficacy lamps meeting the minimum efficacies contained in Table 150 -C and shall not contain a line- voltage socket or line -
voltage lamp holder, OR shall be rated to consume no more than five watts of power as determined by §130(4), and shall not contain a
medium screw -base socket.
150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens shall meet the applicable requirements of §150(k).
150 7: All switching devices and controls shall meet the requirements of §150(k)7-
§150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft-, may be
exempt from the 50% high efficacy requirement when_ all low efficacy luminaires in the kitchen are controlled by.a manual on occupant
sensor, dimmer, energy management system (FMCS), or a multascene programmable control system, and all permanently installed
luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high.efficacy and controlled by a
manual -on occupant sensor.
§ 150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of
illuminated cabinet.
EnergyPro 5.1 by EnergySoft User Number. 1315 RunCode: 2013- 11 -08T09 :37.41 1D: 0130643 Page 11 of 13
MANDATORY MEASURES SUMMARY- Residential (Page 3 of 3) MF -1 R
Project Name
Date
Tsang Residence
1111812013
§150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms
shall be high efficacy.
EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on
occupant sensor certified to comply with the applicable requirements of §119.
EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a
manual -on occupancy sensor.
§150(k)11: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms,
closets, and utility rooms shall be high efficacy lummnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be
allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual -
on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less
than 1000 square feet located on a residential site is not required to comply with § t 50 t 1.
§150(k)12: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters
Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air
leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low -rise residential buildings with four or more
dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the
same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that
they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor,
and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an
astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management
control system (FMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor
luminaires used to comply with Exception) to §150tk) 13 may be controlled by a temporary override switch which bypasses the motion
sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed
luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not
be high efficae _y Luminaires.
§ 150(k)14: Internally illuminated address signs shall comply with Section 148;. OR not contain a screw-base socket, and consume no
more than five watts of power as determined accordin to §130(d).
§1 50(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable
requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles.shall comply with the applicable
requirements of Sections 130, 131 134, and 146.
§150(k)16: Permanently installed lighting in the enclosed, non - dwelling spaces of low -rise residential buildings with four or more
dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided
that they are controlled by an occupant sensors certified to comply with the applicable requirements of 1' 19.
EnergyPro 5.1 byEnergySoft User Number: 1315 RunCode: 2013 -11- 087'09:37 :4i ID-,0130643 Page 12 of 13
HVAC SYSTEM HEA71MG AND COOLING LOADS SUMMARY
Project Name
Tsang Residence
Date
11/8/2013
System Name
HVAC System
Floor Area
2,381
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
1
COIL
CFM
Total Room Loads 1,661
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation 0
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COOLING
PEAK
COIL HTG.
PEAK
Heating System
Sensible
Latent
CFM
Sensible
Ou ut per System
45,643
33,225
1,189
1,065
40.157
Total Output (Btuh)
45,643
0
Output (Btuhlsgft )
19.2
1,837
2,743
Cooling System
0
0
Output par Systern
42,000
0
0
0
0
Total Output (Btuh )
42,000
0
1 1,837
36,900
1,189
0
Total Output (Tons)
3.5
2,743
Total Output Stuh /sgft
17.6
Total Output s cn
680.3
1 45,643
Air System
CFA! per System
0
HVAC EQUIPMENT SELECTION
A ilow (cfm)
0
78° %AFUE
40,052
0
45.643
Airflow (cftn /sgft)
0.00
Airflow cfmfTort
0.0
Outside Air 96
0.0%
ToW Ac4usted System Output
(Adusted for Peak Design conditions)
TIME OF SYSTEM PEAK
40,052
0
Rug 3 PM
45,543
Outside Air (cfm /sgft)
0.00
Note: values above iven at ARI co7idltlons
San 1 AM
HEATlYi1G SYSTEM PSYCHFIOMETROCS
(Airstream Temperatures at Time of Heating
Peals
28 OF
Ou7A,
66 OF
<�-�
66 OF 105 IF
Heating Coil
< T-fl <
r—
103 OF
ROOM
68 OF
COOL WG SYSTEM PSYCHROME11CS Airstream Tem eratures at Time of Cooling Peak
88 /
Outside Air
0 cfm
76 / 62 IF
76 / 62 °F 55 / 54 °F
Cooling Cal
�
56 /54 OF
46.3% i ROOM
75161, OF
1
EnergyPro5.1 byEnergySoff
User Number; 1315 RunCode:2013- 11- 08709:37:41
1D:0130643 Page 13 of13