B-2017-1928 CITY OF CUPERTINO BUILDING PERMIT
BUILDING ADDRESS: ' CONTRACTOR: • PERMIT NO:B-2017-1928
22430 CUPERTINO RD CUPERTINO,CA 95014-1070(326 50 070) LA SOLAR GROUP INC
• VAN NUYS,CA 91406
OWNER'S NAME: PAKNAHAL ALI RAND MESBAHI MOTAHAREH DATE ISSUED: 11/14/2017
OWNER'S PHONE: PHONE NO:(818)359-5868
LICENSED CONTRACTOR'S DECLARATION • BUILDING PERMIT INFO:
License Class ROOFING Lic.#974115
Contractor LA SOLAR GROUP INC Date 06/30/2018 X BLDG _ELECT _PLUMB
MECH X RESIDENTIAL_COMMERCIAL
I hereby affirm that I am licensed under the provisions of Chapter 9(commencing •
with Section 7000)of Division 3 of the Business&Professions Code and that my
license is in full force and effect. • JOB DESCRIPTION:
(N)22-PANEL ROOF MOUNTED PV SYSTEM(7.6 KW)
I hereby affirm under penalty of perjury one of the following two declarations:
1. I have and will maintain a certificate of consent to self-insure for Worker's
Compensation,as provided for by Section 3700 of the Labor Code,for the
r formance of the work for which this permit is issued.
have and will maintain Worker's Compensation Insurance,as provided for by
'Section 3700 of the Labor Code,for the performance of the work for which this
ik. permit is issued. • Sq.Ft Floor Area: Valuation:$30000.00 •
APPLICANT CERTIFICATION
I certify that I have read this application and state that the above
•
information is correct.I agree to comply with all city and county ordinances APN Number: Occupancy Type:
and state laws relating to building construction,and hereby authorize 326 50 070
representatives of this city to enter upon the above mentioned property for ,
inspection purposes. (We)agree to save indemnify and keep harmless the
City of Cupertino against liabilities,judgments,costs,and expenses which PERMIT EXPIRES IF WORK IS NOT STARTED
may accrue against said City in consequence of the granting of this permit. WITHIN 180 DAYS OF PERMIT ISSUANCE OR
Additionally,the applicant understands and will comply with all non-point
source regulations per the Cue-4ino Municipal Code,Section 9.18. 180 DAYS FROM LAST CALLED INSPECTION.
Date 11/14/2017 Issued by:Abby Ayende
•
Date: 11/14/2017
OWNE•-; ILDER DECLARATION
I hereby affirm thatl am exempt from the Contractor's License Law for one of the RE-ROOFS;
following two reasons: All roofs shall be inspected prior to any roofing material being installed.If a roof is
1. I,as ownerof the property,or my employees with wages as their sole installed without first obtaining an inspection,I agree to remove all new materials for
compensation,will do the work,and the structure is not intended or offered for inspection.
•
sale(Sec.7044,Business&Professions Code) .
z. I,as owner of the property,am exclusively contracting with licensed Signature of Applicant:
. contractors to construct the project(Sec.7044,Business&Professions Code). Date: 11/14/2017 .
I hereby affirm under penalty of perjury one of the following three declarations: ALL ROOF COVERINGS TO BE CLASS"A"OR BETTER
1. I have and will maintain a Certificate of Consent to self-insure for Worker's
Compensation,as provided for by Section 3700 of the Labor Code,for the -
performance of the work for which this permit is issued. HAZARDOUS MATERIALS.DISCLOSURE
2. I have and will maintain Worker's Compensation Insurance,as provided for by I have read the hazardous materials requirements under Chapter 6.95 of the
Section 3700 of the Labor Code,for the performance of the work for which this California Health&Safety Code,Sections 25505,25533,and 25534. I will
permit is issued; maintain compliance with the Cupertino Municipal Code,Chapter 9.12 and the
3. I certify that in the performance of the work for which this permit is issued,I Health&Safety Code,Section 25532(a)should I store or handle hazardous •
shall not employ any person in any manner so as to become subject to the material. Additionally,should I use equipment or devices which emit hazardous
air contaminants as defined by the Bay Area Air Quality Management District I
Worker's Compensation laws of California. If,after making this certificate of will maintain compliance with the Cupertino Municipal Code,Chapter 9.12 .nd
exemption,I become subject to the Worker's Compensation provisions of the the Health&Safety .
APPLICANT CERTIFICATION Date: 11/14/2017
I certify that I have read this application and state that the above information is CONSTRUCTION LENDING AGENCY •
correct.I agree to comply with all city and county ordinances and state laws I hereby affirm that there is a construction lending agency for the performance
relating to building construction,and hereby authorize representatives of this city of work's for which this permit is issued(Sec.3097,Civ C.)
to enter upon the above mentioned property for inspection purposes. (We)agree Lender's Name
to save indemnify and keep harmless the City of Cupertino against liabilities,
judgments,costs,'and expenses which may accrue against said City in Lender's Address
consequence of the granting of this permit. Additionally,the applicant understands
and will comply with all non-point source regulations per the Cupertino Municipal ARCHITECT'S DECLARATION
Code,Section 9.18. I understand my plans shall be used as public records.
Signature Date 11/14/2017 Licensed
Professional
CONSTRUCTION PERMIT APPLICATION
k.. ., ' COMMUNITY DEVELOPMENT DEPARTMENT • BUILDING DIVISION
10300 TORRE AVENUE • CUPERTINO, CA 95014-3255 -
vz Iy�.. - 2o IT 1617./3
, .,,,:-..F 1 (408) 777-3228 • buildings-cupertin.o.org PEMIT#B-
CUPERTINO - REVF DEFT✓
❑ NEW CONSTRUCTION ❑ADDITION ❑ALTERATION ❑T.J. ❑MEP ❑RE-ROOF ❑SWIMMING POOL/SPA
PROJECT ADDRESS APN p
'�2-11%0 (up r4ina PO Ad
...613 ��
OWNER NAME
as C.443 t(4:14G e4wdt. Cf-A f or i,no,i (fl Ccs-614 .
' ' rCONTRACTOR NAME 0 OWNER-BUILDER COMPANY NAME• LICENSE NUMBER LICENSE TYPE
IrAct P -Cv L1" 5c1aac Ejr-ovp P-ii s- CNS, c3-7 I .
STREET ADDRESS C C' u CITY,STATE, ZIP '
E-MAILPHONE' ,ac �F
- . IS ‘join. I) Lj f i C" 4I 4°4
BU4LIC I
❑ARCHITECT ❑.OWNER ❑OWNER AGENT VCONTRACTOR AGENT ENGINEER❑DEVELOPER 0 TENANT
CONTACT NAME E-MAIL n '
"beArl,e t -QaOtrir1L.L.e-z . C.{Mcl r 6�,,,,e,2,8 1(Q i cto,,,,.A• co,.., ' '
STREETADDRESS;,, CITY,STATE,ZIP ' PHONE ,,
Q '7 i lit--D1- Aut. -1611ZcillS, cc. e/3526 I 01): 77g-a-?-qy
• DECRIPTON I
' '
• 141scI L1.1. -2Z 'foole,i5 L Sa l cr Pc.r,et s) 1-4.kid
1 I .I
I -
IDSIN9LE-FAis;IIII.Y/DU4EX ❑MULTI-FAMILY 0 INDUSTRIAL 0 COMMERCIAL
- EXISTING USE •EXISTINGSF' NEW FLOOR SF PORCH SF DECK SF DEMO SF STORIES I TOTAL NET SF USE TYPE OCC SQ.FT. VALUATION(5)
I 1 '1 j
'I
REMODEL, ,1 1 REMODEL KITCHEN REMODEL OTHR GARAGE ❑ATTACHED '
BATHROOM SF ' SF SF SF 0 DETACHED
EXISiNG ❑YESEICHLER.' ❑ YES SECOND STORY ADDITION ❑YES
FIRE SPRINKLERS.E NO ;0 NO •❑NO
,DWELLING SECOND DWELLING i❑YES ❑ATTACHED❑DETACHED OTHER
UNITS 1: ' UNIT,'DDITON:.! I❑NO SF
1 11
POOLS! ❑ FIBERGLASS 0 VINYL-LINED 0 GUNITE 0 PREFABRICATED
POOL 'SF .! 'I SPA-:SF j ,SPA ATTACHED❑YES -❑ NO I TOTAL-SF
VBY:I it ' ' REC ED TOTAL VALUATION:
I
Commercial or Multi Family Buildings with Public Swimming Pools requires Department of Environmental Heath approval
RE-ROOF)EXISTING ROOF TYPE: ❑BUILT-UP ROOF❑ASPHALT SHINGLES WOOD SHAKES❑WOOD SHINGLES❑TILE OTHER(SPECIFY)_,..
REMOVE/REPLACE❑NO IF,NO PLYIA'COD ❑w 3/8" PLYWOOD TYPE: PITCH: ROOF CLASS
I ' 11❑YES F OF LAYERS THICKNESS Q 5/8" OTHER ❑OSB ❑CDX OTHER •12 A
PROPOSED ROOF TYPE:❑BUILT-UP ROOF DASPHALT SHINGLES 0 WOOD SHAKES❑WOOD SHINGLES 0 OTHER
I
Provide a signed copy of the Cupertino's Tear-Off Policy SF ✓rof SQUARES
1 By my signature below I;certify to each of the following: I am the property,owner or authorized agent to act on the property owner's behalf. I
have read this application and the information I have provided is correct. I have read the Description of Work and verify it is accurate. I agree
I to comply with all applicable.local ordinances and state laws relating to building construction. .I authorize representatives of Cupertino to
tenter the above-identified property for inspection purposes. I acknowledge and authorize all information contained on this application form
to be made available for publi
6
:"New SFD/Second Dwelling Units/Multifamily Dwellings:A Demolition permit is required prior to issuance of a building permit for all new construction.
1Commercial,Buildings: Provide a completed Hazardous Materials Disclosure form if any Hazardous Materials are being used as part of this project.
;Copy of Planning Approval Letter or Meeting with Planning prior to submittal of Building Permit application.
*HOA-Provide a letter of approval from the Home Owner's Association
Bldg,4pp_2017.doc revised 08/01/17
RACKING SPECS SHEET 11
2093165134
Single Family Residence
Ara Petrosyan
MAP SHEET INDEXCONTRACTOR
LA SOLAR GROUP, INC
ADDRESS: 16238 B Raymer St.,
Van Nuys, CA 91406
PHONE: (818) 373-0077
EMAIL: Engineering@lasolargroup.com
LIC TYPE: C-46, C-10, C-39
LIC #: 974115
PROPERTY INFORMATION
Ara Petrosyan
PROPERTY ADDRESS:
PARCEL NUMBER:
PROPERTY TYPE:
OWNER:
DRAWN BY:
DATE:
Ganesh Subramaniam
22430 Cupertino Rd., Cupertino, CA 95014
November 01, 2017
PHOTOVOLTAIC LAYOUT
PROPERTY PLAN
ATTACHMENT LAYOUT
SHEET 1
SINGLE LINE DIAGRAM
CODE REQUIRED SINGNAGE
INVERTER DATA SHEET
MODULE DATA SHEET
MODULE CERTIFICATION
RACKING CERTIFICATION AND ATTACHMENT SPECS
SHEET 2
SHEET 3
SHEET 4
SHEET 5
SHEET 6
SHEET 7
SHEET 8
SHEET 9
SHEET 10
SHEET 12
GROUNDING & BONDING DETAILS
POWER OPTIMIZER DATA SHEET
7.26 kW DC (6.78 kW AC) PHOTOVOLTAIC SYSTEM INSTALLATION ON EXISTING ROOF
22 PANASONIC 330 WATT MODULES WITH P400 POWER OPTIMIZERS, SOLAREDGE 7.6 kW HD WAVE INVERTER
ONE STORY HOUSE
CONSTRUCTION TYPE: VB
OCCUPANCY GROUP: R3
·2016 California Building Code
·2016 California Residential Code
·2016 California Green Building Standard Code
·2016 California Plumbing Code
·2016 California Mechanical Code
·2016 California Electrical Code
·2016 California Fire Code
·2016 California Energy Code
·2014 International Property Maintenance Code
All materials, equipment, installation and work shall comply with the following applicable codes:
2016 CBC / 2015IBC, - 2016 CRC / 2015 IRC, - 2016 CEC / 2014 CEC, - 2016 CMC / 2015 UMC, - 2016CPC/ 2015UPC, - 2016 CFC /
2015IFC, - 2016 Building Energy Efficiency Standards
● Existing plumbing vents, skylights, exhaust outlets, ventilations intake air openings shall not be covered by the solar photovoltaic
system.
● All outdoor equipment shall be NEMA 3R rated, including all roof mounted transition boxes and switches.
● All equipment shall be properly grounded and bonded in accordance with CEC article 250.
● All circuits connected to more than one source shall have over current devices located so as to provide over current protection
from all sources. [CEC 690.9(A)]
● The utility-interactive inverters shall automatically de-energize its output to the connected electrical production and distribution
network upon loss of voltage in the system and shall remain in that state until the electrical production and distribution network
voltage has been restored.[CEC 690.61]
● Due to the fact that PV modules are energized whenever exposed to light, PV contractor shall disable the array during installation
and service by short circuiting, open circuiting, or covering the array with opaque covering. [CEC 690.1(G)]
● All conductor exposed to weather shall be listed and identified for use in direct sunlight. [CEC 690.31(B), 3i-0.8(D)]
● The module conductors must be type USE-2 or listed for photovoltaic (PV) wire. [CEC 690.31(B)]
● All conductors shall be marked on each end for unique identification. [CEC 690.4 (B)]
● All grounded conductor shall be properly color identified as white. [CEC 200.6]
● PV system connected on the load side of the service disconnecting means of the other source(s) at any distribution equipment on
the premises shall meet the following [CEC 705.12(D)]:
- Each source connection shall be made at a dedicated circuit breaker or fusible disconnecting means. [CEC 705.12(DX1)]
- The sum of the ampere rating of the over current devices in circuits supplying power to the bus bar or conductor shall not exceed
120% of the rating of bus bar or conductor. [CEC 705.12(D)(2)]
- The interconnection point shall be on the line side of all ground-fault protection equipment. [CEC 705.12(D)(3)]
- Equipment containing over current devices in circuits supplying power to a bus bar or conductor shall be marked to indicate the
presence of all sources. [CEC 705.12(D)(4)]
- Circuit breaker, if back fed, shall be suitable for such operation. [CEC 705.12(DX5)]
● To minimize overheating of the bus bar in panel board, the panel board main circuit breaker and the PV power source circuit
breaker shall be physically located at the opposite end of the bus bar.[CEC 705.12(DX7)]
● Marking and Labeling Methods and Locations. The labels or markings shall be visible after installation. The labels shall be reflective,
and all letters shall be capitalized and shall be a minimum height of 9.5 mm (3⁄8 in.) in white on a red background. 690.31 (4)
● Flexible, fine-stranded cables shall be terminated only with terminals, lugs, devices or connector that are identified and listed for
such use. [CEC 690.3].(F) & 110.14(A)]
● Connectors shall be of latching or locking type. Connectors that are readily accessible and operating at over 30 volts shall require
tool to open and marked "Do Not Disconnect Under Load" or "Not For Current interrupting”. [CEC 690.33(C) & (E)(2)]
● Equipment grounding conductor for PV modules smaller than 6AWG shall be protected from physical damage by a raceway or
cable armor. [CEC 690.45 & 250.120(C)]
● Equipment grounding conductor for PV systems without Ground Fault Protection (GFP) and installed on non-dwelling unit must
have ampacity of at least 2 times the temperature and conduit fill corrected circuit conductor ampacity, [CEC 690.45(B)]
● Fine-stranded cables used for battery terminals, devices, and connections require lugs and terminals listed and marked for the
use. [CEC 690.74 (A)]
● A directory is not required where all inverters and PV disconnecting means are grouped at the main service disconnecting
means, since the disconnects would all be located in close proximity to each other. CEC 690.4(D)
● Fuses and Fixed-Trip Circuit Breakers. The standard ampere ratings for fuses and inverse time circuit breakers shall be
considered 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100, 110, 125, 150, 175, 200, 225, 250, 300, 350, 400, 450, 500, 600, 700,
800, 1000, 1200, 1600, 2000, 2500, 3000, 4000, 5000, and 6000 amperes. 690.9(A)
● Protection devices for PV source circuits and PV output circuits shall be in accordance with the requirements of 690.9(B)
through (E).
● Listed PV overcurrent devices shall be required to provide overcurrent protection in PV source and output circuits. The
overcurrent devices shall be accessible but shall not be required to be readily accessible. 690.9 (D)
● Equipment that performs the rapid shutdown shall be listed and identified. 690.12 The rapid shutdown initiation methods shall
be labeled in accordance with 690.56(B)
● PV source circuits and PV output circuits shall not be contained in the same raceway, cable tray, cable, outlet box, junction box,
or similar fitting as conductors, feeders, branch circuits of other non-PV systems, or inverter output circuits, unless the conductors of
the different systems are separated by a partition. CEC 690.31(B)
● Direct-Current Photovoltaic Source and Direct-Current Output Circuits on or Inside a Building. 690.31 (G)
GENERAL NOTES
Abby Ayende
11/08/17
11/08/17
B-2017-1928
Abby Ayende
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale
PV SYSTEM
AS INDICATED
1
CONTRACTOR:
Drawn By :
Ara Petrosyan
Lic # 974115
Ara Petrosyan
N
S
W E
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
INVERTER
INVERTER TYPE: Central:
Solar Edge 6.0 kW Inverter
Model #SE6000H-US(240V)
IN (N) 6.0 kW Inverter
SOLAR MODULES
___ Panasonic 330 Watt
Model #VBHN330SA16
22
JB (N)Junction Box
EMT type Conduit
Fire Setback Line
INDEX
PHOTOVOLTAIC
LAYOUT
MSP (E) _____ Main Service Panel200A
PV ARRAY
AC (N) 60A AC Disconnect
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
NOTE: CONDUIT SHALL BE PAINTED TO MATCH EXISTING SURFACE.
1'-6"
1'-6"
1'-6"
3'
Array 1
18 Panasonic 330 Watt modules
18 P400 Power Optimizers
Tilt: 20 Deg
Azimuth: 180 Deg
Array 2
4 Panasonic 330 Watt modules
4 P400 Power Optimizers
Tilt: 20 Deg
Azimuth: 270 Deg
AC
IN
MSP
Cupertino Rd.,
0 5' 10'
J/B
AC disconnectInverter
1
1
1
1
1
1
1
1 1
1
12
2
2
2
2
22
22
22
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 2PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
PROPERTY
PLAN
IN Inverter
LEGEND
AC AC Disconnect
MSP Main Service Panel
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Cupertino Rd.,
0 5' 10'
N
S
W E
130'-1"
119'-9"
34'-10"
46'-7"
36'-9"
61'-10"DRIVEWAY15'-5"
MSP
IN
AC
PROPERTY LINE
GARAGE
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 3PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
ATTACHMENT
LAYOUT
MODULES ON ROOF
1 Layer of _________
Plywood & Building Felt
DF#2 2"x4" - 24" O.C.
SOLAR MODULE
6"
ATTACHMENT
20°
DF#2 2"x4"
Shingle
BLOCKING
DF#2 2"x6"
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
6'
ATTACHMENTS
2" BY 4''
TRUSSES
24" O.C.
UNIRAC RAIL
NOTE: MAXIMUM ATTACHMENT DISTANCE 6'-0''
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 4PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
GROUNDING
& BONDING
DETAILS
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Ara Petrosyan
Abby Ayende
11/08/17
5
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
SINGLE LINE
DIAGRAMJ BOX
NEMA3R
INVERTER
SOLAR EDGE 6.0 kW
MODEL
#SE6000A-US(240V)
Solar Edge 6.0 kW Inverter have
Integrated DC Disconnect safety
switch and Arc Fault Protection
(See datasheet on page # 7)
(4) #10 AWG PV WIRE
INTEGRATED GROUDING
FREE IN THE AIR
(4) #10 AWG THWN/THWN-2
(1) #8 AWG GND
3/4'' EMT,40 FEET
SolarEdge Power Optimizer P400
Rated DC Input Power - 400 watts
Maximum Input Voltage - 80 Vdc
MPPT Range - 8 to 80 Vdc
Maximum Input Current - 12.5 Adc
Maximum Output Current - 15 Adc
String Limitations - 8 to 25 Optimizers,
5250 watts STC per string maximum.
Solaredge optimizers have integrated
rapid shut down
1
2
11
(3) #8 AWG THWN/THWN-2
(1) #8 AWG GND
3/4" EMT, 6 FEET_____ BUSUTILITY
M MAIN METER
EXISTING
______ MAIN
SERVICE PANEL
120/240V,
1P, 3W
NOTE: Service Panel does not contain center
fed Main breaker.
EXISTING
NON CENTER _____
MAIN C/B
GROUND ELECTRODE(S) TO
BE 5/8 DIAMETER X10'-0''
LONG EMBEDDED A MINIMUM
OF 8'-0'' DIRECTLY INTO SOIL
PER ART. 250.53(G)200A 200A
35AINSTALL ____ 2P CB(PV)
INSTALL AT OPPOSITE
END OF BUS FROM
MAIN FEEDER CB
200A
· If there is a cold water bonding and UFER, no
additional supplementary rod is required
· If there is no UFER, new ground rod shall be installed
· If existing ground rod is more than 25 OHM, than a
new ground rod shall be installed
60A NON FUSED AC DISCONNECT,
LOCKABLE,BLADE TYPE,
NEMA3R
120 / 240V
(UTILITY REQUIRED)
(3) #8 AWG THWN/THWN-2
(1) #8 AWG GND
3/4" EMT, 2 FEET
Ara Petrosyan
Main Panel Suitable for
Back feed - NEC 705.12(D)(3)LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale
PV SYSTEM
AS INDICATED
November 01, 2017
1
2
11
STRING #1 STRING #2
PV ARRAYS
STRING#1 - 11 MODULES
STRING#2 - 11 MODULES
22 PANASONIC 330 WATT MODULES
1 SOLAR EDGE 6.0 KW INVERTER
ALL WIRES WILL BE CONNECTED WITH
600V RATED WIRE NUTS WITH SEALANT.
CONNECTORS SHALL BE LOCKING,
TOOL TYPE
Abby Ayende
11/08/17
6
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
SIGNAGE
POWER TO THIS BUILDING IS ALSO SUPPLIED FROM
THE FOLLOWING SOURCES WITH
DISCONNECTS LOCATED AS SHOWN :
CAUTION
North
WARNING PLAQUE
INVERTER TYPE: Central
MAIN SERVICE
Ara Petrosyan
SIGNAGE
PHOTOVOLTAIC REQUIREMENTS
PER CALIFORNIA ELECTRICAL CODE ARTICLE 690
PHOTOVOLTAIC SYSTEM DISCONNECT
RATED AC OUTPUT CURRENT - 31.25 AMPS
AC NORMAL OPERATING VOLTAGE 240 VOLTS
WARNING
DO NOT TOUCH TERMINALS ON BOTH
LINE AND LOAD SIDES MAY BE
ENERGIZED IN THE OPEN POSITION
WARNING
ELECTRIC SHOCK HAZARD.
DO NOT TOUCH TERMINALS.
TERMINALS ON BOTH THE LINE AND
LOAD SIDES MAY BE ENERGIZED IN THE
OPEN POSITION.
Marking shall be placed on interior and
exterior DC conduit, raceways, enclosures
and cable assemblies every 10 ft (3048 mm)
within 1 ft (305 mm) of turns or bands and
within 1 ft (305 mm) above and below
penetrations of roof/ceiling assemblies,
walls or barriers.
COMBINER /
JUNCTION
BOX
ARRAY
WARNING
DO NOT TOUCH TERMINALS ON BOTH
LINE AND LOAD SIDES MAY BE
ENERGIZED IN THE OPEN POSITION
ON
OFF
DC
DISCONNECT
(if applicable)
DC DISCONNECT
INVERTER
(if applicable)
ON
OFF
AC
DISCONNECT
WARNING
RATED OUTPUT CURRENT 31.25 AMPS
AC NORMAL OPERATING VOLTAGE 240 VOLTS
WARNING:
PHOTOVOLTAIC POWER SOURCE
This lable is to be located adjacent to the PV breaker
36'' to 75'' above the floor or grade
level to center of performance meters
(IF APPLICABLE)
SERVICE
METER
METER
SOCKET
(if applicable)
WARNING:
PHOTOVOLTAIC POWER SOURCE
WARNING
INVERTER OUTPUT
CONNECTION. DO NOT
RELOCATE THIS
OVERCURRENT DEVICE
OPTIONAL SOLAR P.V.
ONLY COMBINER
PANEL BOARD
PV SUB PANEL
(if applicable)
WARNING
PHOTOVOLTAIC SYSTEM - DO NOT
RELOCATE THIS BREAKER
WARNING
ELECTRIC SHOCK HAZARD.
IF GROUND FAULT IS INDICATED
NORMALLY GROUNDED
CONDUCTORS MAY BE
UNGROUNDED AND ENERGIZED.
Solar Source Only
No Other Loads in
This panel
CEC 690.5(C)
CEC 690.14(C)(2)
PHOTOVOLTAIC
SYSTEM DISCONNECT
CEC 690.17
WARNING
ELECTRIC SHOCK
HAZARD. THE DC CONDUCTORS
OF THIS PHOTOVOLTAIC SYSTEM
ARE UNGROUNDED AND MAY BE ENERGIZED.
CEC 690.35(F)
OPERATING CURRENT 5.7 AMPS
OPERATING VOLTAGE 380 VOLTS
MAXIMUM SYSTEM VOLTAGE 500 VOLTS
SHORT CIRCUIT CURRENT 14.9 AMPS
CEC 690.5(C)
CEC 690.14(C)(2)
PHOTOVOLTAIC
SYSTEM DISCONNECT
CEC 690.54
WARNING
DUAL POWER SOURCES SECOND SOURCE IS
PHOTOVOLTAIC SYSTEM
CEC 690.64(B)(4)
690.64(b)(7)
PHOTOVOLTAIC SYSTEM EQUIPPED
WITH RAPID SHUTDOWN
690.56
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
CEC. 5. MAKINGS, LABELS AND WIRING SIGNS.
A. Purpose: Provide emergency responders with appropriate warning and guidance with respect to isolating solar electric system.
This can facilitate identifying energized electrical lines that connect solar panels to the inverter, as these should not be cut when venting for smoke removal
B. Main Service Disconnect.
1. Residential buildings - The marking main be placed within the main service disconnect. The marking shall be placed outside cover if the main service disconnect is operable with the service
panel closed.
2. Commercial buildings - Tha marking shall be placed adjacent to the main service disconnect clearly visible from the location where the level is operated.
3. Markings: Verbiage, Format and Type of Material.
a. Verbiage: CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED
b. Format: White lettering on a red background. Minimum 3/8 inches letter height. All letters shall be capitalized. Arial or similar font, non bold.
c. Material: Reflective, weather resistant material suitable for the environment (use UL - 969 as standard for weather rating). Durable adhesive materials meet this requirement.
C.Marking Requirements on DC conduit, raceways, enclosures, cable assemblies, DC combiners and junction boxes:
1. Markings: Verbiage, Format and Type of Material.
a. Placement : Markings shall be placed every 10 feet on all interior and exterior DC conduits, raceways, enclosures, and cable assemblies, at turns, above and for below penetrations, all DC combiners
and junction boxes
b. Verbiage: CAUTION: SOLAR CIRCUIT Note: The format and type of material shall adhere to "V. V-3b, c" of this requirement.
c. Inverters are not required to have caution markings
1. Marking is required on all interior and exterior DC conduit, raceway, enclosures, cable assemblies, and junction boxes, combiner and disconnects.
2. The materials used for marking shall be reflective, weather resistant material suitable for the environment.Minimum 3/8" letter height; all upper case letters Arial or similar font; Red
background with wight lettering.
3. Marking shall contain: WARNING: PHOTOVOLTAIC POWER SOURCE.
4. Marking shall be placed adjacent to the main service disconnect in a location clearly visible from the location were the disconnect is operated.
FIRE DEPARTMENT REQUIREMENTS
AS INDICATED
PV SYSTEM
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale
November 01, 2017
Cupertino Rd.,
PV SYSTEM DISCONNECT
FOR UTILITY OPERATION
INVERTER
SERVICE POINT &
UTILITY METERING
SOLAR PHOTOVOLTAIC
ARRAY ON ROOF
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 7PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
INVERTER
DATA SHEET
INVERTER DATA SHEET
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 8PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
POWER OPTIMIZER
DATA SHEET
POWER OPTIMIZER DATA SHEET
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 9PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
MODULE
DATA SHEET
MODULE DATA SHEET
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Abby Ayende
11/08/17
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 10PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
MODULE
CERTIFICATION
MODULE CERTIFICATION
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Abby Ayende
11/08/17
RACKING
SPECS
RACKING SPECS
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 11PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Abby Ayende
11/08/17
RACKING
CERTIFICATION
AND ATTACHMENT
SPECS
RACKING CERTIFICATION
Project Name and Address
No. Revision/Issue Date
General Notes
Project Sheet
Date
Scale 12PV SYSTEM
AS INDICATED
CONTRACTOR:
Drawn By :
Lic # 974115
Ara Petrosyan
Ganesh Subramaniam
22430 Cupertino Rd.,
Cupertino, CA 95014
November 01, 2017
ATTACHMENT SPECS
Ara Petrosyan
LA Solar Group
16238 B Raymer St.,
Van Nuys, CA 91406
Phone: (818) 373-0077
LIC TYPE: C-46, C-10, C-39
Abby Ayende
11/08/17